22 May 2013

Electrical Engineering

Free Technical Reference and White Paper Downloads

If you would like to be notified of future updates to our resources, please complete the form below:

First Name*		Surname*
Email*		Country*
Company		Position

Information recorded in this form is kept according to our privacy policy

If at any time you wish to UNSUBSCRIBE from IDC Technologies membership, simply e-mail: idc@idc-online.com requesting to be unsubscribed. Its that simple!

Technical References

Design and Electrical Characteristics Enhancement of the Floating Island IGBT with Low On-Resistance (529.64 KB) This paper suggested and analyzed a new FLI IGBT structure, featuring the insertion of the P Floating Island into the n-drift region, thus improving the on-state voltage drop property without degradation of breakdown voltage.
Methods for Calibration (311.34 KB)
Modern Advances in Electrical Conductivity (293.25 KB)
Multiobjective Sensor Node Deployement in Wireless Sensor Networks (67.35 KB) The objectives considered in the paper include maximizing network coverage, connectivity and network lifetime.We propose a multi-objective PSO and fuzzy based optimization model for sensor node deployment.
Quality Assurance for CMS Tracker (281.18 KB)
Reading an Electrical Meter (372.02 KB)
Residential Electric Metering (180.11 KB)
A Calibration System for Instrument Transformers with Digital Output (454.02 KB) This paper mainly describes the development of a system for the calibration of instrument transformers with digital output.
A CMOS High-Voltage DC-DC Up Converter Dedicated for Ultrasonic Applications (68.71 KB) This paper concerns the design and implementation of a fully integrated High Voltage CMOS DC-DC Up Converter (VHVUC) dedicated to ultrasonic transmitters.
A COMPARATIVE ANALYSIS OF MEAN SQUARE ERROR ADAPTIVE FILTER ALGORITHMS FOR GENERATION OF MODIFIED SCALING AND WAVELET FUNCTION (165.56 KB) In this paper, a technique to determine the filter bank coefficients of Wavelets db3 and coif2 using mean square error adaptive filter RLS algorithm has been presented.
A COMPARATIVE STUDY ON PERFORMANCE OF 3KW INDUCTION MOTOR WITH DIFFERENT SHAPES OF STATOR SLOTS (108.23 KB) A comparative study on performance of 3KW induction motor with different shape of stator slots is presented.
A Comparison of Symmetrical and Asymmetrical Three-Phase H-Bridge Multilevel Inverter for DTC Induction Motor Drives (798.58 KB) This paper presents a comparison study for a cascaded H-bridge multilevel direct torque control (DTC) induction motor drive.
A Complete Multimode Equivalent-Circuit Theory for Electrical Design (403.77 KB) This work presents a complete equivalent circuit theory for lossy multimode transmission lines. Its voltages and currents are based on general linear combinations of standard normalized modal voltages and currents.
A Control Strategy Based on UTT and ISCT for 3P4W UPQC (432.93 KB) This paper presents a novel control strategy of a threephase four-wire Unified Power Quality (UPQC) for an improvement in power quality.
A critical comparison of formulations for the computation of induced ELF fields into the in human body (486.32 KB) The purpose of this paper is to review critically the different approximations. The performed simulations show that as long as only ELF fields are involved, the classical approximations hold.
A Custom-made MATLAB Based Software to Manage Leakage Current Waveforms (1498.53 KB) In this paper, two stand-alone MATLAB based softwares, â€œLeakage Current Waveform File Converterâ€ and â€œLeakage Current Waveform Viewerâ€, both equipped with a user friendly GUI, are presented.
A Design Comparison of Low Power 50 nm Technology Based Inverter with Sleep Transistor and MTCMOS Scheme (338.37 KB) This paper proposes a sleep transistor based minimum size inverter in BSIM4.3.0, 50nm CMOS technology with supply voltage of 1V, power dissipation of 46.28nW at 0.502V and maximum drain current of 70nA
A Design of Electronically Tunable Voltage Voltage-mode Universal Filter with High Input Impedance (332.79 KB) This article presents a voltage-mode universal biquadratic filter performing simultaneous 3 standard functions employing DDCC and CCCII as active element.
A Finite Element Subproblem Method for Position Change Conductor Systems (58.14 KB) Analyses of magnetic circuits with position changes of both massive and stranded conductors are performed via a finite element subproblem method. A complete problem is split into subproblems associated with each conductor and the magnetic regions.
A Frequency Grouping Approach for Blind Deconvolution of Fairly Motionless Sources (408.85 KB) A frequency grouping approach for multi-channel instantaneous blind source separation (I-BSS) of convolutive mixtures is proposed for a lower net residual ISI and ICI than the conventional short-time Fourier transform (STFT) approach.
A Fuzzy Logic Based Two Inductor Boost Converter System (191.94 KB) This paper deals with the simulation of Fuzzy Logic based two inductor boost converter system. Fuzzy Logic controller is designed in MATLAB environment for the closed loop control model.
A Global Reference Guide for Reading Schematic Diagrams (229.58 KB) The purpose of this paper is to provide a simple cross-reference of common schematic/wiring diagram symbols used throughout various parts of the world.
A Hardware Architecture for Motion Compensated Video Frame Rate Up-Conversion (923.46 KB) A hardware architecture for motion compensated, video frame rate up-conversion (MC-FRUC) applications is presented in this paper.
A Hidden Markov Model-Based Isolated and Meaningful Hand Gesture Recognition (861.72 KB) In this paper, we propose an automatic system that recognizes isolated gesture, in addition meaningful gesture from continuous hand motion for Arabic numbers from 0 to 9 in real-time based on Hidden Markov Models (HMM).
A HIGH EFFICIENCY CHARGE PUMP FOR LOW VOLTAGE DEVICES (249.31 KB) This paper includes voltage analysis of different charge pumps. On the basis of voltage analysis a new charge pump is proposed.
A HIGH-PERFORMANCE AND LOW-POWER DELAY BUFFER (462.48 KB) In this paper, presents circuit design of a low-power delay buffer. The proposed delay buffer uses several new techniques to reduce its power consumption.
A Highly Reliable Platform with a Serpentine Antenna for IEEE 802.15.4 over a Wireless Sensor Network (1506.41 KB) Our experiments showed that the transmission distance can be greater than 18 m without any loss of data over a WSN when using this antenna.
A HYBRID APPROACH FOR DENOISING DICOM IMAGES. (162.93 KB) This paper provides a new model based on the hybridization of wavelet and relaxed median filter for denoising of noisy medical images.
A Low-Voltage Current-Mode Wheatstone Bridge using CMOS Transistors (390.35 KB) This paper presents a new circuit arrangement for a current-mode Wheatstone bridge that is suitable for low-voltage integrated circuits implementation.
A MEMS-based Coriolis Mass Flow Sensor for Industrial Applications (781.41 KB) This paper discusses about the performance of a MEMS-based Coriolis mass flow sensor, designed for industrial applications.
A META CLUSTERING APPROACH FOR ENSEMBLE PROBLEM (90.38 KB) Our approach retains all of the information provided by a given ensemble, allowing the similarity among instances and the similarity among clusters to be considered collectively in forming the clustering.
A Microcontroller Implementation of Constrained Model Predictive Control (402.83 KB) In this paper, we propose an efficient firmware for the implementation of constrained MPC in the performed STM32 microcontroller using interior point method.
A Modern Automatic Bus Transfer Scheme (999.25 KB) The proliferation of technology has made global conduction of business increasingly dependent upon the availability of reliable power.
A NEURAL NETWORK BASED APPROACH FOR TRANSMISSION LINE FAULTS (828.7 KB) In this paper, a neural network based methodology is proposed for power transmission line faults.
A New Fuzzy Positive and Negative Ideal Solution for Fuzzy TOPSIS (813.45 KB) This paper presents a fuzzy multiple criteria decision making (FMCDM) problem with the Technique for Order Performance by Similarity to Ideal Solution (TOPSIS) based on the new concept of positive and negative ideal solution.
A New Hammerstein Model for Non-Linear System Identification (182.16 KB) In the present work a newer type of black box nonlinear model in Hammerstein structure is proposed.
A New Maximum Power Point Tracking for Photovoltaic Systems (373.36 KB) In this paper a new maximum power point tracking algorithm for photovoltaic arrays is proposed. The algorithm detects the maximum power point of the PV.
A New Moving-magnet Type Linear Actuator utilizing Flux Concentration Permanent Magnet Arrangement (1541.99 KB) This paper presents a moving-magnet type linear actuator designed by using flux concentration type permanent magnet arrangement, which can generate higher magnetic flux density in air-gap.
A NEW OPTIMISED DESIGN OF SINGLE PHASE GAS INSULATED CONE TYPE INSULATOR (211.33 KB) In this paper the applicability of FGM spacer for gas insulated power apparatus has been verified. In the FGM spacer, a spatial distribution of permittivity for the control of the electric field distribution in and around the spacer is used.
A New Tool for Live On-Site HV Tranformers (629.52 KB)
A Nodal Transmission Pricing Model based on newly developed expressions ofPower Marginal Prices (398.72 KB) The purpose of this paper is to present a nodal transmission pricing model based on SRMC by developing new mathematical expressions of real and reactive power marginal prices using GA-Fuzzy based optimal power flow framework.
A Novel Linear Element-Based Equivalent Circuit Model of CMOS Gyrator-C Active Transformer (876.88 KB) In this research, the novel equivalent circuit model of the CMOS gyrator-C active transformer has been proposed.
A Novel Approach for Cooling Electronics Using a Combined Heat Pipe and Thermoelectric Module (349.65 KB) The paper presents a numerical analysis of a novel cooling system. Simulations performed are based on use of computational fluid dynamics and results obtained in terms of cooling efficiencies are compared to those of the traditional cooling.
A Novel Approach for Measuring Electrical Impedence (1908.53 KB)
A Novel Approach for the Optimal PMU Placement using Binary Integer Programming Technique (191.67 KB) The proposed approach integrates the impacts of both existing conventional power injection/flow measurements and the possible failure of single or multiple PMU/communication line into the decision strategy of the optimal PMU allocation.
A NOVEL CONTROL STRATEGY FOR ENHANCEMENT OF POWER QUALITY USING FUZZY LOGIC (284.96 KB) This paper deals with simulation of shunt active filters using fuzzy logic to improve the power quality and reduction in the transient time of capacitor voltage, when there is change in load.
A Novel Control Strategy of Three-phase, Four-wire UPQC for Power Quality Improvement (360.47 KB) The current paper presents a novel control strategy of a three-phase, four-wire Unified Power Quality (UPQC) to improve power quality.
A Novel High Stop Band All Complementary MOSFET Switched-Capacitor Filter (315.49 KB) The proposed design is very suitable for the realization of analog signal processing blocks in complementary MOSFET integrated circuits.
A Novel Image Highly Compression Technique With Spread Parameter (345.26 KB) A novel image highly compressed technique has been introduced to reduce the artifacts in compressed JPEG images.
A Novel Linear Switched Reluctance Machine: Analysis and Experimental Verification (791.16 KB) A novel stator geometry for LSRMs that improved the force profile is presented in this research paper. Static and dynamic characteristics for the proposed structure had been highlighted using Two Dimensional (2-D) Finite Element Analyses(FEA).
A Novel Low Input Impedance Low Power Fully Differential Current Buffer (884.36 KB) A new fully differential (FD) low input impedance CMOS current buffer with low voltage, and low power operation is presented.
A Novel Low Power Digitally Controlled Oscillator with Improved linear Operating Range (660.24 KB) In this paper, an ultra low power and low jitter 12bit CMOS digitally controlled oscillator (DCO) design is presented.
A Novel Methodology Proposed for Optimizing the Degree of Hybridization in Parallel HEVs (433.63 KB) In this paper, a new Genetic Algorithm (GA) based methodology is proposed to optimize the Degree of Hybridization (DOH) in a passenger parallel hybrid car.
A novel optimized JTAG interface circuit design (483.99 KB) This paper describes a novel optimized JTAG interface circuit between a JTAG controller and target IC.
A Novel Structure for Vector Control of Symmetrical Six-Phase Induction Machines with 3 Current Sensors (522.66 KB) In this paper vector control of a symmetrical six-phase induction machine with a novel configuration is presented.
A Novel Technique to Precise the Diagnosis of Power Transformer Internal Faults (342.11 KB) In this paper a new fuzzy logic algorithm based technique is developed which gives the vulnerability status of internal faults by considering thermal, electrical and mechanical conditions prevailing in the transformer and integrating them.
A Novel Voltage Divider Circuit (245.89 KB) A novel analog divider is described in this paper. The circuit enables the division of a dc voltage with another dc voltage.
A NOVEL WEIGHT-IMPROVED PARTICLE SWARM OPTIMIZATION FOR COMBINED ECONOMIC AND EMISSION DISPATCH PROBLEMS (127.92 KB) This paper presents a weight improved particle swarm optimization (WIPSO) strategy for solving the combined economic and emission dispatch (CEED) problems.
A Physics-Based Model for Fast Recovery Diodes with Lifetime Control and Emitter Efficiency Reduction (378 KB) The model provides a good trade-off between reverse recovery time and forward voltage drop realized through a combination of lifetime control and emitter efficiency reduction techniques.
A Profit-Based Maintenance Scheduling of Thermal Power Units in Electricity Market (325.08 KB) This paper presents one comprehensive modelling approach for maintenance scheduling problem of thermal power units in competitive market.
A PWM CONTROLLED SYNCHRONOUS LINK CONVERTER SCHEME FOR POWER QUALITY IMPROVEMENT AT NONLINEAR LOAD (167.68 KB) This paper presents modeling and simulation of a Synchronous Link Converter (SLC) using PWM connected to a single-phase system having both reactive and non-linear load.
A Review of VF Controller for an Asynchronous Generator Based Wind Energy Conversion System (308.17 KB) This paper presents a review of VF controllers, other related economic and technical aspects, and their selection for specific applications.
A robust approach to the load frequency control problem with speed regulation uncertainty (439.6 KB) In this paper, we propose a robust controller to replace the conventional PI controller which guarantees performance and stability of the power system over the range of variation of the speed regulation constant.
A Robust STATCOM Controller for a Multi- Machine Power System Using Particle Swarm Optimization (535.73 KB) Design of a fixed parameter robust STATCOM controller for a multi-machine power system through an H-âˆž based loop-shaping procedure is presented.
A Self Healing Methodology for Economic Integration of Wind Farms to Modern Power Networks (513.21 KB) This paper presents a differential evolution methodology to relieve congestion and improve quality and cost efficacy of generated power,formulating a penalty based congestion constrained OPF problemâ€™ in a hybrid thermal-wind power farm .
A Simulator for Potential Distribution Analysis (836.22 KB) This paper proposes a reduced-scale simulator that can replace numerical analytic methods for the estimation of potential distribution caused by ground faults in various grounding systems.
A SPACE VECTOR PWM SCHEME FOR NEUTRAL POINT CLAMPED MULTILEVEL INVERTERS (399.17 KB) This work is devoted to the study and simulation of a new NPC multilevel inverter system typically suitable for high-performance high-power applications
A STATISTICAL ANALYSIS OF LOSS FACTOR: A CASE STUDY IN APEPDCL-KAKINADA (175.3 KB) In this work, a statistical analysis of this relationship using the curves of a sampling of consumers in a specific company is presented.
A STRATEGIC APPROACH TO COMMUNICATION WITH DATA USERS (37.98 KB) Communication and more desirably engagement by statistical offices with users has improved significantly over the years in many countries
A Strategic Review on Growth of InP on Silicon Substrate for Applications in High Frequency RF Devices (294.07 KB) A review is presented on the advances in InAlAs/InGaAs High Electron Mobility transistors (HEMT) on silicon substrates for high frequency and low noise applications.
A Study of K-Factor Power Transformer Characteristics by Modeling Simulation (1161.21 KB) The main objective in this paper is to study the effect of harmonics on oil filled transformer and to simulate harmonic behavior using Matlab Simulink.
A Study on Evaluation of Strut Type Suspension Noise Caused by Rubber Degradation (732.98 KB) On this, the study also confirmed that field noises can be reproduced through a durability test that considers heat aging.
A Study on Fuzzy Adaptive Control of Enteral Feeding Pump (577 KB) This paper proposes fuzzy adaptive controller for the robust control of the peristaltic tube pump.
A Study on the Hot Spot Temperature in 154kV Power Transformers (1025.35 KB) This paper measures the hot spot temperature in the single-phase, 154kV, 15/20MVA power transformer by the optical fiber sensors & compares the value with hot spot temperature calculated by conventional heat run test in the factory test.
A Sub-Pixel Image Registration Technique with Applications to Defect Detection (391.93 KB) This paper presents a useful sub-pixel image registration method using line segments and a sub-pixel edge detector.
A Technique for Enhancement of Power System Dynamic Stability (893.34 KB) This paper presents a technique for power system dynamic stability enhancement. This technique consists of IPFC with Lead-Lag Controller.
A Web-enabled digital power meter (290.91 KB) This paper explains about a web-enabled digital meter.
A Web-enabled Digital Power Meter Paper 2010 (290.91 KB)
A Weighted Sum Technique for Joint Optimization of Performance, Power Consumption in Data Centers (322.32 KB) The proposed technique is compared with the greedy and LR heuristics for large-scale problems, and the optimal solution for small-scale problems implemented in LINDO.
â€œSpeed Control of Permanent Magnet Synchronous Motor Drive Using an Inverterâ€ (232.11 KB) The performance of the motor is experimentally verified and the results are found to be encouraging. It is also observed that, under varying load condition, the speed of a motor remains constant at constant frequency.
Accurate Digital Three-Phase Electricity Meter (224.22 KB)
Accurate Prediction Method of Breakdown Voltage in Air at Atmospheric Pressure (1036.13 KB) The proposed method has been successfully applied to evaluate the breakdown voltage in circular parallel-plane electrodes.
Adaptive Image Transmission with P-V Diversity in Multihop Wireless Mesh Networks (612.27 KB) We propose layer resource allocation scheme to minimize the receiver side distortion within delay bound requirements, by exploring application layer Position and Valuediversity as well as multihop Effective Capacity.
ADAPTIVE NOISE SUPPRESSION IN VOICE COMMUNICATION USING ASSNFIS SYSTEM (438.13 KB) The paper proposed the adaptive noise suppression technique for suppression of noise in voice communication.In the paper we used â€œfuzzy logicâ€ technique for adaptive filteration.
Adaptive Sampling Algorithm for ANN-based Performance Modeling of Nano-scale CMOS Inverter (564.82 KB) This paper presents an adaptive technique for generation of data required for construction of artificial neural network-based performance model of nano-scale CMOS inverter circuit.
Adaptive Tuning - Expectations and Limitations (47.6 KB) Adaptive tuning promises to tune loops without disturbing the process. This paper explores some of the pros and cons of adaptive tuning.
Adjustable Speed Motor Drives (70.08 KB)
ADVANCED POWER ELECTRONICS AND ELECTRIC MACHINES (629.45 KB) This paper explains about advanced power electronics and electric machines.
Advanced Signal Processing Techniques for Fault Detection and Diagnosis in a Wind Turbine Induction Generator Drive Train (826.75 KB) This paper deals with the diagnosis of Wind Turbines based on generator current analysis. It provides a comparative study between traditional signal processing methods with more sophisticated approaches.
Advanced Stochastic Models for Partially Developed Speckle (365.43 KB) In this work, we derive stochastic models for speckle noise, with an emphasis on speckle as it arises in medical ultrasound images.
Aging Study and Lifetime Estimation of Transformer Mineral Oil (121.5 KB) A study accomplished on the used oil specimens coming from several power transformers of various ages to recognize the correlation between the real age of the oil and the rate of its different characteristics.
ALGORITHM OFMAINTENANCE ACTIVITIES OPTIMIZATION TO SCHEDULING PREVENTIVE TASK (961.23 KB) This work proposes an algorithm based on: the real-time decision, the planning of maintenance tasks,allocation of tasks to appropriate resources under constraints of tasks duration &skills,at same time minimizing the cost of maintenance service.
All You Wanted To Know About Short-Circuits - But Were Afraid To Ask (270.25 KB)
Ampacity of Buried Cable in Non-Homogenous Environmental Condition by 3D Computation (394.1 KB) Finite Volume Method is chosen to calculate heat transfer field & heat generation with in the cable & heat dissipation in the surrounding soil of 3 phase 145kV underground cable brunch to make it possible to analyze the ampacity of the cable.
An Adaptive Electric Differential for Electric Vehicles Motion Stabilization (627.23 KB) This paper proposes a traction drive system for electric vehicles (EVs) with two separate induction motor drive-based wheels.
An Advanced Time-Frequency Domain Method for PD Extraction with Non-Intrusive Measurement (1675.65 KB) In this paper a novel PD extraction method that uses frequency analysis and entropy based time-frequency (TF) analysis is introduced.
An Approach for GPS Clock Jump Detection Using Carrier Phase Measurements in Real-Time (1024.45 KB) In this study, a real-time architecture for the detection of clock jumps in the GPS clock behavior is proposed.
An Efficient Approach for Optimal Placement of TCSC in Double Auction Power Market (420.42 KB) This paper proposes an investment cost recovery based efficient and fast sequential optimization approach to optimal allocation of thyristor controlled series compensator (TCSC) in competitive power market.
AN EFFICIENT METHOD FOR PAPR REDUCTION IN OFDM SYSTEMS WITH REDUCED COMPLEXITY (471.27 KB) A reduced complexity partial transmit sequence (PTS) scheme has been proposed to solve high peak to average power ratio (PAPR) of orthogonal frequency division multiplexing (OFDM) system.
An ensemble of Weighted Support Vector Machines for Ordinal Regression (359.76 KB) An enhanced method based on an ensemble of Support Vector Machines (SVMâ€™s) is proposed.
An Integrated Switch in a HV-SOI Wafer Technology, With a Novel Self-Protection Mechanism (1800.42 KB) An integrated switch to control electrical stimuli in implantable medical devices is presented. First a self-biased protection mechanism to avoid VGS reaching maximum rated value is presented
An Intelligent Multi-multivariable Dynamic Matrix Control Scheme for Drum-type Boiler-Turbine System (461.41 KB) A 160 MW drum-type boiler-turbine system is developed in the present research through a multi-multivariable dynamic matrix control (DMC) scheme and a multi-multivariable model approach.
AN INVESTIGATION OF THE THERMAL SHOCK BEHAVIOR OF THERMAL BARRIER COATINGS (301.78 KB) This paper presents the development of thick TBCs, focusing attention on the microstructure of the Yttria Partially Stabilized Zirconia (YPSZ) coating and Zirconia ceria powder (Ce+YPSZ)
An Overview of Cumulative SIRelated Errors on Dynamic& Static Performances of 2nd Order LP-Î£Î”Ms (1096.03 KB) We present in this work a systematic analysis to identify Sigma Delta Modulators (Î£Î”Ms) nonidealities, such as charge injection error, I/O conductance ratio error and settling time error.
AN RFID AND MULTI-AGENT BASED SYSTEM ENABLING ACCESS TO PATIENT MEDICAL (348.52 KB) This paper presents an RFID-based multi-agent system in order to make patient emergency care as efficient and risk-free as possible.
Analysis of Different Topologies of Inverter in 0.18Î¼m CMOS Technology and its Comparision (646.78 KB) This paper includes analysis of inveter topologies utilized in VLSI that includes CMOS, Pseudo NMOS and Dynamic families. The characteristics include DC transfer characteristics, current Vs voltage characteristics,
ANALYSIS OF EFFECTS OF VECTOR CONTROL ON TOTAL CURRENT HARMONIC DISTORTION OF ADJUSTABLE SPEED AC DRIVE (124.43 KB) This paper involves modeling and control of an Induction motor and investigates its effects on the total current harmonic distortion of the adjustable speed ac drives.
Analysis of Electric Circuits Using Fourier Series (572.82 KB) This work examines the analysis of electric circuit&representation of periodic functions as infinite trigonometrically series in sine, cosine terms & presents analysis of Fourier series with regard to its applications in electric circuits.
Analysis of Failure Statistics and History Test Record for Power Transformer Maintenance (729.53 KB) In this paper, power transformer is selected as pilot equipment for maintenance improvement analysis because of its cost and failure consequence.
ANALYSIS OF FAULT ON 1.5 MW WIND POWER PLANTS (360.46 KB) In this paper it is proposed to model a 1.5MW wind farm using doubly fed induction generator and study the effects of phase to ground faults under various load conditions.
ANALYSIS OF INVERTER FED MICROGRIDS FOR DIFFERENT MODES OF OPERATION (575.18 KB) This paper presents analysis of control techniques of a converter fed microgrid in grid connected mode and islanded mode of operation.
Analysis of Polymer Surface Modifications due to Discharges Initiated by Water Droplets (885.53 KB) This paper investigates the influence of various parameters on the behaviour of water droplets on polymeric surfaces under high electric fields.
Analysis of Stability of PV System using the Eigenvalue according to the Frequency Variation (768.2 KB) This paper analyzes the correlation between the frequency protection requirements and the stability of grid-connected PV system for the adjustable operating setting of frequency protection.
ANALYSIS OF SUBSYNCHRONOUS RESONANCE EFFECT IN SERIES COMPENSATED LINE (460.4 KB) To analyze the SSR phenomenon, analysis has been done on Second Benchmark model system using both frequency analysis and eigenvalue techniques with three phase fault for different compensation levels.
Analysis of Target Location Estimation in High Performance Radar System (345.09 KB) In this paper, an analysis of a target location estimation system using the best linear unbiased estimator (BLUE) for high performance radar systems is presented.
Analysis of Transient Overvoltages within a 345kV Korean Thermal Plant (1461.28 KB) This paper presents the simulation results for the analysis of a lightning surge, switching transients and very fast transients within a thermal plant.
Analysis of Very Fast Transient over Voltages Intransformer in 400kv Gis By Wavelet (618.26 KB) This paper deals with analysis of vftos in transformer in 400KV GIS ,transformer model is designed in matlab simulink and the vftos generated by the operation of CB are analyzed by Wavelet transform for both open and closing conditions of CB.
ANATOMY OF SOLAR CYCLE LENGTH AND SUNSPOT NUMBER: DEPENDENCE OF AVERAGE GLOBAL TEMPERATURE ON SOLAR ACTIVITY (376.72 KB) The paper examines thoroughly all the past 23 sunspot cycles and the associated 11 hale cycles. It is noticed that solar cycle 23 had a deep minimum with longest decline phase.
ANATOMY OF SOLAR CYCLE LENGTH AND SUNSPOT NUMBER: DEPENDENCE OF AVERAGE GLOBAL TEMPERATURE ON SOLAR ACTIVITY (376.72 KB) The paper examines thoroughly all the past 23 sunspot cycles and the associated 11 hale cycles. It is noticed that solar cycle 23 had a deep minimum with longest decline phase.
Antioxidant status of Penaeus monodon fed with Dunaliella salina supplemented diet and resistance against WSSV (111.96 KB) The present study investigates the protection of shrimp Penaeus monodon against white spot syndrome virus (WSSV) using Dunaliella salina algal cells which contains an antioxidant betacarotene for the shrimp nonspecific immunity
Application of Artificial Neural Network in Economic Generation Scheduling of Thermal Power Plants (530.76 KB) The artificial neural network has been applied to the economic generation scheduling of six thermal power plants with very promising results.
Application of computer simulation for the design of a new high voltage transducer (1332.22 KB) This paper shows the development of an improved high voltage transducer for field application, for DC measurements and for use in power quality studies.
APPLICATION OF HYBRID PSOGA FOR OPTIMAL LOCATION OF SVC TO IMPROVE VOLTAGE STABILITY (328.76 KB) Research is carried out to investigate application of Particle Swarm Optimization (PSO), Genetic Algorithm (GA) and hybrid PSOGA to find optimal location and rated value of SVC device.
Application of Instrument Transformers in Power Quality Assessment (412.05 KB) This paper explains how to use instrument transformers or other devices for measuring voltages and currents of considerable values.
APPLICATION OF PROGRESSIVE QUADRATIC RESPONSE SURFACE METHOD FOR AN OSCILLATION PROBLEM OPTIMIZATION (65.05 KB) The paper presents an effective optimization strategy applied in a physical structure optimization of a semiconductor Power MOSFET with expensive constraint computations.
Application of Pulse Doubling in Star-Connected Autotransformer for Power Quality Improvement (619.92 KB) This paper presents a pulse doubling technique in a 12-pulse ac-dc converter which supplies direct torque controlled motor drives (DTCIMDâ€™s) in order to have better power quality conditions at the point of common coupling.
Application of soft computing methods for Economic Dispatch in Power Systems (300.55 KB) This paper presents a comparative study of four different evolutionary algorithms i.e. genetic algorithm, bacteria foraging optimization, ant colony optimization and particle swarm optimization for solving the economic dispatch problem.
APPLICATION OF THEORY OF CONSTRAINTS AND CRITICAL CHAIN METHOD (1411.37 KB) The success includes timely completion with available resource in a significant manner. The success delivery is by application of Theory of Constraints and Critical chain management in critical phases.
Application of Using Hybrid Renewable Energy in Saudi Arabia (405.06 KB) In Kingdom of Saudi Arabia a remote village called Al-Qtqt, was selected as a case study in order to investigate the ability to use a hybrid power system to provide the village with its needs of electricity.
Arc Flash Paper 2010 (710.59 KB)
Assisted Creative Robot Arm Assembly and Control Program Design (1923.39 KB) This study aimed to learn basic principles of robotic movement, the writing, and design of Java code, and in turn, complete repetitive works for controlling robotic arms to pick up objects at fixed points, move them, and place them.
Asynchronous Transfer Mode (ATM) Switching (100.88 KB) Asynchronous Transfer Mode (ATM) is an International Telecommunication Unionâ€“ Telecommunication Standardization Sector (ITU-T)
Attitude Determination GPS/INS Integration System Design Using Triple Difference Technique (995.14 KB) This paper proposes an ADGPS/INS integration system using the triple difference carrier phase observables.
Automatic Generation Control of Interconnected Power System with Generation Rate Constraints (370.5 KB) This paper proposes Hybrid Neuro Fuzzy (HNF) approach for AGC of two-area interconnected reheat thermal power system with the consideration of Generation Rate Constraint (GRC).
Automatic Tariff Controller in Electricity Meter (101.55 KB) This paper highlights about the innovative usage of automatic tariff controller in electricity meter.
Automatic Tranferring of Power Supplies (75.95 KB)
Automating the Classification of Field Leakage Current Waveforms (466.04 KB) In this paper, a number of 500 leakage current waveforms recorded on a composite post insulator installed at a 150 kV High Voltage Substation suffering from intense marine pollution, are investigated.
Basic Vocational Knowledge âˆ’ Electrical Machines (903.9 KB) This paper gives general information about electrical machines, synchronous machines, asynchronous motors, direct current machines, single phase alternating current motors and transformers.
Battery Chargers and Energy Efficiency Paper 2010 (172.66 KB)
Battery Chargers and Energy Efficiency: Summary of Findings and Recommendations (172.66 KB) This paper briefly summarizes the findings and recommendations on battery chargers and energy efficiency.
Best Practices Paper 2010 (345.08 KB)
Best Practices: Energy Efficiency (345.08 KB) This paper will help in finding tips for energy efficiency related to appliances, insulation and weatherization, heating and cooling, landscaping, lighting, and windows.
BEST PRACTICES: THE ENGINEERING APPROACH FOR INDUSTRIAL BOILERS (33.08 KB) This paper provides a framework to examine all aspects of Boiler Best Practices to optimize system performance, and Total Cost of Operations.
Biomedical Image Edge Detection using an Ant Colony Optimization Based on Artificial Neural Networks (324.66 KB) In this paper, ACO is introduced for resolving the edge detection in the biomedical image. Edge detection method based on ACO is able to create a matrix pheromone that shows information
BLOOM ENERGY FOR PRODUCING ELECTRICITY (141.67 KB) The primary purpose of this paper is to examine the technical implications of the Bloom Box fuel cell. Secondlythe report evaluates the Bloom Box as a potential electricity source for homes and private businesses.
BOILER CONTROL SYSTEMS (431.39 KB) This paper provides criteria for the design of heating plant instrumentation.
Boiler optimisation (113.38 KB) This paper contains information about different boiler applications, optimising the performance of boilers and efficient steam systems.
Building Energy Efficiency (3.35 MB) This paper focuses on energy use in buildings, which account for over one-third of all energy used in the United States.
Building Energy Efficiency Paper 2010 (3.35 MB)
Building Manipuri-English Machine Readable Dictionary by Implementing Ontology (95.23 KB) Any system that hopes to process natural languages as people do must have information about words, their meaning, concept, relative words in another language and meaningful sentences are composed of meaningful words.
Cable Tension Control and Analysis of Reel Transparency for 6-DOF Haptic Foot Platform (1003.33 KB) This paper presents a non-ideal motorized reel design with its corresponding control strategy that aims at overcoming the aforementioned issues.
Calculation of Electromagnetic Fields (EMF) in Substations of Shopping Centers (1437.91 KB) This paper analysis the numerical calculations in ELF-400 software of EMF in distribution substation in shopping center.
Calculation of Local Iron Loss in Electrical Machines Using Finite Elements Method (381.73 KB) In this paper, a Finite Element based simulation coupled with well known hysteresis model called Preisach model is used to calculate local iron loss of a synchronous machine.
Calculations for HV and LV Networks (634.88 KB)
Calibration and Standards in Flow Measurement (157.76 KB) This paper explains about Calibration, Gravimetric Calibration of Liquid Flowmeters, Volumetric Calibration of Liquid Flowmeters, Calibration of Gas Flowmeters and Mixed or Multiphase Flowmeters.
Calibration System for Electronic Instrument Transformers With Digital Output (119.78 KB) This paper describes a new measurement system that can be used for calibrating instrument transformers with digital output in the digital domain under various measurement conditions.
CARBON NANOTUBE: IMPLEMENTATION OF CARBON NANOTUBE IN SUPERCAPACITOR (223.82 KB) This paper deals with the implementation of carbon nanotube as electrode in supercapacitor to store much more energy .the author also consults with the problem may face and try to resolve the problems.
CARRIER OVERLAPPING PWM METHODS FOR ASYMMETRICAL MULTILEVEL INVERTER (430.6 KB) An experimental seven-level inverter test rig has been built to implement the proposed algorithm.
CARRIER OVERLAPPING PWM STRATEGIES FOR THREE PHASE FIVE LEVEL DIODE INVERTERS (422.88 KB) This paper presents a comparative study of diode clamped and cascaded three phase five-level inverters based on sinusoidal PWM & modified space vector PWM control techniques.
Cascaded ANN for Evaluation of Frequency and Air-gap Voltage of Self-Excited Induction Generator (354.84 KB) The results obtained from the ANN model are used to evaluate the overall performance of SEIG and are found to be in good agreement with experimental results. Hence, analysis of SEIG can be carried out using ANNs.
Case Study On Power Factor Improvement (94.11 KB) Electrical Power constitutes a major component of the manufacturing cost in industry. In an electrical installation, power factor may become poor because of induction motors, welding machines, power transformers, voltage regulators.
CDM in Sub-Stations by Replacement of SF6 Gas in Circuit Breaker (89.49 KB) This paper gives a case of large Sub-Station Clean Development Mechanism (CDM) Project to analyze CDM projectâ€™s influence on Indiaâ€™s Sustainable Development.
CFD guides design of biomass boiler retrofit to increase capacity by 25% and decrease ash carryover by 60% (514.57 KB) This paper explains how Computational fluid dynamics (CFD) analysis supported the design optimization of a wood-fired furnace that was tested to operate with a 25% capacity increase with a 60% decrease in particulate emissions.
Chaos Control in Nonlinear Systems Using the Generalized Backstepping Method (276.97 KB) One of the most important nonlinear systems for checking the abilities of control methods is chaos. In this study chaos in Lorenz system was used for checking abilities of new control method.
CHAPTER 1 NUMERICAL METHODS (516.14 KB) This paper deals with the very common problems of numerical integration and the solution of simple equations.
Characterization of Silver Inkjet Overlap-printing through Cohesion and Adhesion (1089.08 KB) We introduce an understanding of silver (Ag) inkjet overlap-printing characteristics from the viewpoints of cohesion between ink droplets and adhesion between an ink droplet and a surface
Characterization of the capacitive voltage transformers as coupling paths (239.06 KB) This paper explains about the characterization of the capacitive voltage transformers as coupling paths and measuring devices for the high-voltage transients in a substation.
CIRCUIT THEORY EE411 (173.5 KB) This paper shows various formulas, circuit diagrams and notations used in circuit theory.
Circuit theory of power factor correction in switching converters (283.65 KB) This paper discusses the circuit theory aspects of power factor correction in switching converter circuits.
Classical and Quantum Circuit Theory (403.97 KB) This paper follows the text on the circuit model of noise by H.A. Haus [1].
Classifier System and Co-evolutionary Hybrid to Restoration Service of Electric Power Distribution (1158.52 KB) The method proposed by the author is intended for assistance in decision-making by operators of complex distribution systems during states of malfunction, through designation of connection action scenarios.
Classroom HVAC: Improving Ventilation and Saving Energy (351.66 KB) This paper provides a summary of the detailed plans developed for the field study that took place in 2005 to evaluate the energy and IAQ performance of a new classroom HVAC technology.
Cold Weather Operating Problems with SF6 Circuit Breakers (350.15 KB)
COMPANDING TECHNIQUE IN OFDM LINEAR CODED SYSTEMS (530.6 KB) In this paper novel Low density parity check (LDPC) encoded new companding technique is proposed which offers improved bit error rate, minimizes out-of-band interference and reduce PAPR effectively.
Comparison of Different Control Strategies in GA-Based Optimized UPFC Controller in Electric Power Systems (268.64 KB) This study presents a study of the application of a Unified Power Flow Controller to control power transmission, generator terminals voltage and better damping of Low Frequency Oscillation in Single-Machine Infinite-Bus power system.
Comparison of GA, DE, PSO and SA Approaches in Enhancement of Total Transfer Capability (283.29 KB) In this paper the performance of metaâ€“heuristics algorithms such as Genetic Algorithm, Differential Evolution,Particle Swarm Optimization and Simulated Annealing for the problem of TTC enhancement using FACTS devices are compared.
Comparison of SVC and STATCOM in Static Voltage Stability Margin Enhancement (655.07 KB) In this paper, the effects of SVC and STATCOM in Static Voltage Stability Margin Enhancement will be studied.
Comparison of the DC/DC-Converters for Fuel Cell Applications (697.75 KB) This paper presents the methods and results of the calculation of the efficiency and the expense for the realization for the circuits of the DC/DC-converter that meet these requirements.
Comparisons of Heat Transfer Performance of a Closed-looped Oscillating Heat Pipe and Heat Pipe with Check Valves (309.04 KB) This research studies the comparisons of heat transfer performance of closed-looped oscillating heat pipe and closed-looped oscillating heat pipe with check valves heat exchangers with R134a, Ethanol and water used as the working fluids.
COMPENSATION OF POWER QUALITY PROBLEMS USING ACTIVE POWER FILTER (397.02 KB) The proposed scheme offers good solution to uncertainties in power system due to power quality problems. The circuit is simulated using MATLAB/SIMULINK.
Competent Universal Reversible Logic Gate Design for Quantum dot Cellular Automata (1628.04 KB) In this work we devoted to design a Reversible Logic Gate which is a universal gate (known as URLG) and can be design with alternative of co-planer cross over wire.
Computer simulation technique for teaching basic communication and signaling system (757.97 KB) In this paper, MATLAB is employed as a demonstration tool for easy understanding of basic Amplitude Modulation Technique with its behaviourial pattern analyzed.
Condition Based Maintenance (307.63 KB)
Condition Based Maintenance: How To Get Started (182.9 KB)
Connecting Smart Meter with Mobile Phones (701.13 KB)
CONSTANT POWER CONTROL OF 15 DFIG WIND TURBINES WITH ENERGY STORAGE (660.81 KB) Simulation studies are carried out in PSCAD/EMTDC on a wind farm equipped with 15 DFIG wind turbines to verify the effectiveness of the proposed control scheme.
Contribution of Maxwell Stress in Air on the Deformations of Induction Machines (1899.99 KB) The contribution of the Maxwell stress in the air gap and coil regions of the machine on the deformation is studied by comparing results obtained with and without inclusion of the stress into the calculation.
Control of a Novel PV Tracking System Considering the Shadow Influence (710.53 KB) This paper proposes a novel control strategy of a PV tracking system considering the shadow influence.
Control of Boiler Operation using PLC â€“ SCADA (443.34 KB) This paper outlines the various stages of operation involved in the conversion of a manually operated boiler towards a fully automated boiler.
CONTROL OF MERCURY EMISSIONS FROM COAL-FIRED ELECTRIC UTILITY BOILERS (279.07 KB) This paper describes about currently available data, limitations, estimated potential, and Research Development and Demonstration (RD&D) needs for controlling mercury emissions from specific boilers.
Control of Mercury Emissions Paper 2010 (279.07 KB)
Control Secheme and Performance Improvement for Multilevel Dc Link Inverter Fed PMBLDC Motor Drive (1157.3 KB) This paper introduces a design for speed control of the PMBLDC motor using multilevel dc link inverter fed by a Boost Converter.
Control Strategy for Discontinuous Conduction Mode Boost Rectifier with Low Total Harmonic Distortion (364.14 KB) The line current, shows considerable distortion when the peak input voltage is close to the output voltage. As a result, the input power factor is poor. This study proposes a simple, low-cost method to reduce the line harmonics.
Control Strategy of Three Phase Shunt Active Power Filter for Power Quality Improvement (171.79 KB) The performance is evaluated by total harmonic distortion (THD) in the compensated mains current and detailed discussions are presented here.
Conventional and Fuzzy Logic Controllers at Generator Location for Low Frequency Oscillation Damping (629.84 KB) This paper investigates and compares performance of various conventional and fuzzy logic based controllers at generator locations for oscillation damping.
CONVERSION EFFICIENCY IMPROVEMENT FOR ENERGY CONSERVATION USING MATRIX CONVERTER (264.99 KB) In this paper the AC-AC conversion topology known as Matrix Converter (MC), is modeled using MATLAB.Venturiniâ€™s simplified algorithm is used to determine the switch modulation duty cycle.
Coordinated control of a series-parallel hybrid electric bus during EV/HEV mode transition (957.05 KB) Aiming at achieving smooth transition from the EV mode to the HEV mode for series-parallel hybrid electric bus, this paper proposes a transient control strategy to coordinate the diesel engine and the motors during the transition process.
Coupling Phenomenon between the Lightning and High Voltage Networks (606.3 KB) In this paper we present an analysis of the electromagnetic coupling between an external electromagnetic field generated by the lightning and an electrical overhead lines, so we give an important and original contribution.
Current Differential Protection based on Non-Conventional Instrument Transformer and IEC61850 (101.36 KB) This paper analyzes the time delay of transferring sampled values from NCIT to current differential relay in accordance with IEC 61850.
CURRENT HARMONICS IN A DECOUPLED SVPWM CONTROLLED DUAL TWO LEVEL INVERTER (422.64 KB) In this paper, Space Vector PWM Switching scheme is employed for a dual two level inverter feeding an Induction motor from both ends (open end winding).
Current Transformer Concepts (581.58 KB) This paper reviews the C and K bushing relay accuracy ratings for current transformers (cts) and their implications in relay application.
Current Transformers (155.98 KB) This paper explains in detail about the Current Transformers (CT's) Accuracy, Sizing, Selection, Mounting and Installation.
Current Transformers (151.69 KB) This paper explains about the types of Current transformers, Calculation of CT accuracy, Series connection of low-ratio bushing CT's and Polarity and connections.
Current Transformers - Ratio / Polarity / Types (630.29 KB) This paper explains about the ratio,polarity and types of current transformers.
Cutting Technique for Biodegradable Rope using a CW CO2 Laser with TEM00 mode (586.15 KB) As the biodegradable rope consists of three twisted strands, the thickness changes relative to the position of the laser beam and we thus propose a method to determine exact cutting depth.
Data Communication - Emerging International Trends and Practices of the Australian Bureau of Statistics (190.5 KB) Results of a survey recently conducted by Statistics Canada suggest that many National Statistical Offices (NSOs) are in different stages of progress in migrating from a paper-based publishing
Data Communications (56.7 KB) Modern data communications techniques rely on many concepts and ideas that all seem to have evolved in a relatively short span of time.
Data Communications & Computer Networks (1858.96 KB) Data communication is no different, so we begin by looking to the past, and studying the â€™historyâ€™ of data communication. Data communication is just one kind of communication,
DC Marine Technologies Discrimination: Don’t Leave It Too late (24.2 KB)
DC Marine Technologies Introduction to Grounded Neutrals (25.88 KB)
DC Maritime Technologies: Electrical System Propulsion System Evaluation (410.99 KB)
Decentralized Controller Design for Static Synchronous Compensator Using Robust Quantitative Feedback Theory Method (466.29 KB) In this research a robust control approach based on the QFT method was proposed for the design of STATCOM controllers and also supplementary damping controller for increase of power system oscillations damping is developed.
Decoupled Control Of Active And Reactive Powers Of DFIG With Cascaded SPWM Converters. (267.64 KB) This paper presents the dynamic modeling and simulation of a doubly fed induction generator (DFIG) driven by wind turbine connected with cascaded converters.
DEMO Based Optimal Power Purchase Planning Under Electricity Price Uncertainty (419.28 KB) This paper aims at developing an optimal power purchase model with two objectives viz economy and environment ,taking various functional operating constraints
DESIGN & ANALYSIS OF FLY BACK CONVERTER FOR GRID & FILAMENT POWER SUPPLIES (285.03 KB) The aim of the project is to design the Grid power supplies and Filament Power supply based on the Fly back Converter topology which is operated at 100 KHz in DCM mode and CCM mode respectively.
Design & Implementation of Low Power 3-bit Flash ADC in 0.18Î¼m CMOS (187.92 KB) This paper describes the design and implementation of a Low Power 3-bit flash Analog to Digital converter (ADC).
Design Analysis of High-Speed Axial-Flux Generator (176.01 KB) This article presents a modeling procedure with some details for performance predictions of High-Speed Axial Flux Generator (HSAFG). The FEM results are employed to validate the proposed model.
Design and Analysis of Horizontal Axis Wind Turbine Rotor (153.71 KB) This paper presents an optimization model for rotor design of 750 kW horizontal axis wind turbine. The wind turbine blade is a very important part of the rotor.
DESIGN AND DEVELOPMENT OF AN ULTRASONIC MOTION DETECTOR (210.45 KB) In this work, a transmitter transducer generates a signal at a frequency of 40khz, and when the signal is blocked by any moving object, and this in turn, triggers a buzzer via a timing circuit.
Design and preliminary tests of a twin coil HTS SMES for pulse power operation (842.57 KB) In this paper, the design of a twin coil 2 Ã— 200 kJâ€“1 MW pulse power high temperature superconductor (HTS) superconducting magnetic energy storage (SMES) demonstrator is presented.
Design and Simulation of Fuzzy Logic controller for DSTATCOM In Power System (782.62 KB) In this paper design of self tuned fuzzy set theory based PI controller is incorporated in typical FACTS device DSTATCOM. Its effects are tested in power systems.
DESIGN AND SIMULATION STUDIES OF D-STATCOM FOR VOLTAGE SAG, SWELL MITIGATION (406.27 KB) This paper presents the design of a prototype distribution static compensator (D-STATCOM) for voltage sag mitigation in an unbalanced distribution system.
Design Criteria on Substation Protection by using Instrument Transformers (457.11 KB) This paper describes about the instrument transformers (current transformers and voltage transformers) as the protective relays for protection of Pyinmana-substation in Myanmar.
Design for Systems Modelled by Bond Graphs with Multivariable Monotone Nonlinearities (528.41 KB) A methodology to design a nonlinear observer in a bond graph approach is proposed.
Design of a Low Power Compensated 90nm RF Multiplier for a Transmitted Reference Receiver Front End (497.48 KB) In this paper, a double balanced radio frequency multiplier is presented which is customized for transmitted reference ultra wideband (UWB) receivers.
DESIGN OF A MICROCONTROLLER BASED PFC (275.79 KB) This paper discusses the design of a controller for Power Factor Correction (PFC). A microcontroller based PFC design is proposed and design issues are discussed.
Design of a Non-linear Observer for VSI Fed Synchronous Motor (527.36 KB) This paper discusses two observers, which are used for the estimation of parameters of PMSM.
Design of Current-Type Readout Integrated Circuit for 160 Ã— 120 Pixel Array Applications (1148.23 KB) We propose a Readout Integrated Circuit (ROIC), which applies a fixed current bias sensing method to the input stage in order to simplify the circuit structure and the infrared sensor characteristic control.
Design of DC Link Filter and Inverter Output Filter for Induction Motor Drive System. (999.28 KB) This paper presents Design of Dc link filter and Inverter output filter for induction motor drive system.
Design of Filters for PWM Inverter Fed AC Drivers Using Simulation Program (276.5 KB) In this paper, accurate simulation models for power cables and motors that allow a better understanding of the over-voltage problem are developed.
DESIGN OF HELICAL SHAPED HEATING COIL AND LOAD CIRCUIT FOR INDUCTION HEATER (487.13 KB) In this paper, parameters of primary heating coil in on-load condition has been determined with different secondary metallic objects.
Design of Interval Type-2 Fuzzy Logic Based Power System Stabilizer (618.18 KB) This paper presents the performance of an application of latest development of type1 fuzzy logic which is interval type2 fuzzy logic as a Power System Stabilizer (PSS).
Design of Low Power Full Adder Using Active Level Driving Circuit (748.86 KB) An Active Level Driving Circuit(ALDC) is proposed for driving the level restoring weak PMOS pull-up transistor.
DESIGN OF ON-CHIP BUS OCP PROTOCOL WITH BUS FUNCTIONALITIES (468.64 KB) In this paper, the most efficient bus architecture was adopted to support most advanced bus functionalities including simple transactions, burst transactions, pipelined transactions, and out-of-order transactions.
Design of PID Controller for Higher Order Continuous Systems using Model Formulation Technique (398.25 KB) This paper proposes a new algebraic scheme to design a PID controller for higher order linear time invariant continuous systems.
Design of Planar Power Transformers (394.6 KB) This paper presents a fast and easy method to make designs for planar power transformers and also examples which have been designed with this fast procedure.
Design of Power System Stabilizer Based on Sliding Mode Control Theory for Multi- Machine Power System (495.79 KB) The control objective is to enhance stability and improve the dynamic response of the multi-machine power system.
Design of Static Synchronous Series Compensator Based Damping Controller (358.65 KB) This paper presents a systematic approach for designing Static Synchronous Series Compensator (SSSC) based supplementary damping controllers for damping low frequency oscillations in a single-machine infinite-bus power system.
Design Projects in a Programmable Logic Controller (PLC) Course in Electrical Engineering Technology (134.5 KB) A Programmable Logic Controller (PLC) is a specialized computer used for the control and operation of manufacturing process and machinery.
DESIGN STANDARDS ELECTRICAL SCHEMATIC DIAGRAMS (531.68 KB) This paper provides standards for all electrical schematic diagrams for the LHC and its detectors.
Design Strategy for Optimum Rating Selection of Interline D-STATCOM (431.6 KB) This paper is concerning about calculating the optimum rating for two D-STATCOMs when used in the interline mode i.e. Interline D-STATCOM (ID-STATCOM) Structure.
Design, Modeling and Simulation of Fuzzy Controlled SVC for Transmission Line (510.55 KB) This paper attempts to design and simulate the Fuzzy logic control of firing angle for SVC in order to achieve better, smooth and adaptive control of reactive power.
Detecting the Capacity Reserve in an Overhead Line (540.27 KB) The paper contains a comparative analysis of the mechanical and thermal limitations of an existing overhead line based on certain calculation conditions characterizing the examined variants.
Determination of Characteristic Frequency for Identification of Hot Spots in Proteins (256.29 KB) In this work an alternative approach for identification of characteristic frequency using power spectral density is described. The performance of the proposed method is observed to be better than the DFT-based approach.
DETERMINATION OF HIGHER HEATING VALUE OF BIODIESELS (94.49 KB) Biodiesel, an alternative fuel can be used in diesel engine as neat or blended with diesel. The physiochemical properties of fuel are important in design of fuel system for compression ignition engine run on diesel, biodiesel or biodiesel blend.
Determination of Relaxation and Retardation Spectrum from Modulus of Complex Material functions (1946.02 KB) The paper is devoted to improving and simplifying determination of the relaxation and retardation spectrum (RRS).
Development of a Live-line Insulator Inspection Tool System for 154 kV Power Transmission Lines (1898.4 KB) The current paper deals with a new live-line insulator inspection tool system that will be used by the Korea Electric Power Corporation for its 154 kV power transmission lines in 2011.
Development of Current-Fed ICPT System with Quasi Sliding Mode Control (1635 KB) A mathematic model of the system is built up with stroboscopic mapping method and fixed-point theory is applied to get the accurate zero voltage switching (ZVS) frequency.
DEVELOPMENT OF DIRECT TORQUE CONTROL MODELSVI FOR 3 PHASE INDUCTION MOTOR (237.91 KB) This paper present the principle of the direct torque control for voltage source inverter fed induction motor drive, and switching table, amplitude selection of the hysterics band of torque and flux.
Development of Wireless Electric Concept Powering Electrical Appliances (262.03 KB) This study presents a concept of harvesting and transferring energy to a low power electrical appliances using wireless technology where interconnecting wires are not available.
DIELECTRIC RELAXATION BEHAVIOUR OF ACRYLONITRILE AND 2-ACRYLAMIDO 2-METHYLE PROPANE SULPHONIC ACID (AN-AMPS) COPOLYMERS (93.63 KB) This paper reports the dielectric relaxation behaviour of acrylonitrile and 2-acrylamido 2-methyle propane sulphonic acid (AN-AMPS) copolymers from the measurements of dielectric constant (Îµ)and loss(tanÎ´) as a function of frequency ,
Digital Automatic Gain Control Integrated on WLAN Platform (622.4 KB) In this work we present a solution for DAGC (Digital Automatic Gain Control) in WLAN receivers compatible to IEEE 802.11a/g standard.
DIMENSIONAL EFFECT ON OPTICAL PROPERTIES OF CADMIUM ZINC TELLURIDE THIN FILMS (75.03 KB) In this work, thin films of Cd1-xZnxTe of 1Î¼m and 100nm thickness are fabricated on plain glass substrates with â€˜xâ€™ varying from 0.0567 to 0.2210.
DIRECT TORQUE CONTROL FOR DOUBLY FED INDUCTION MACHINE-BASED WIND TURBINES (153.2 KB) This paper proposes a rotor flux amplitude reference generation strategy for doubly fed induction machine based wind turbines.
Discrete Particle Swarm Optimization Algorithm Used for TNEP inNetwork Adequacy Restriction (355.39 KB) In this paper, STNEP problem is being studied considering network adequacy restriction using discrete particle swarm optimization (DPSO) algorithm.
Distance Protection Scheme For Protection of Long Transmission Line Considering the Effect of Fault Resistance (312.22 KB) This paper presents a new approach, known as artificial neural network (ANN) to overcome the effect of fault resistance on relay mal-operation.
Distributed Generation (444.88 KB)
Distributed Generator Placement and Sizing in Unbalanced Radial Distribution System (618.6 KB) This paper presents a simple method for investigating the problem of choosing best location and size of DG in three-phase unbalanced radial distribution system for power loss minimization and to improve the voltage profile of the system.
DISTRIBUTED STATIC SERIES COMPENSATOR (DSSC) APPLICATION TO POWER SYSTEM (96.64 KB) This paper is showcasing review of distributed static series compensator ( DSSC) & explains the effect of insertion of DSSC in transmission line power flow control.
Distribution System Protection and Reliability (270.25 KB)
Distribution System Reconfiguration Considering Customer and DG Reliability Cost (1506.68 KB) This paper presents a novel objective function for distribution system reconfiguration for reliability enhancement.
Doping Profile Measurement and Characterization by Scanning Capacitance Microscope (460.66 KB) This paper presents the doping profile measurement and characterization technique for the pocket implanted nano scale n-MOSFET.
Drain Current Models for Mosfets & Undoped Symmetric & Asymmetric Double-Gate SOI Mosfets (215.88 KB) In this paper modeling framework for single gate conventional planar MOSFET and double gate (DG) MOSFETS are reviewed.
DSP Implementation of Power Measurements (301.02 KB) digital signal processor (DSP) based prototype platform used to support advanced power measuring algorithms is presented.
Dynamic performance analysis of T network impedance matching (893.48 KB) The analysis results suggest that higher Q value produces worse dynamic stability and that matching result is more sensitive to load impedance variation when the load reflection coefficient of static state is larger.
Dynamic Voltage Scaling With Reduced Frequency Switching And Preemptions (125.53 KB) The main challenges of Dynamic Voltage Scaling are increased number of preemptions and frequency switching.To limit such processes, an algorithm is proposed which reduces both unwanted frequency switching and preemptions.
Dynamics of IGBT based PWM Converter A Case Study (138.06 KB) In this paper, we have studied and analyzed the dynamics of IGBT based PWM converter with subjected to different conditions like transient state, steady state feeding the RLC load.
Dynamics of Metallic Particle Contamination in Gas Insulated Substation (GIS) (305.35 KB) This paper analyses the movement of free conducting particles inside a single phase Gas Insulated Bus duct(GIB).
Economic Considerations Underlying Adoption of HVDC, HVAC for Connection of Offshore Wind Farm (435.09 KB) The current paper aims to compare both systems for a 2 GW wind farm situated 80 km from the Point of Common Coupling on an economic basis using a discounted cash flow analysis.
Eddy currents and corner singularities (282.83 KB) The aim of this work is to introduce a method to tackle a magneto-harmonic problem in a bidimensional setting where the conducting medium is non-magnetic and has a corner singularity.
EEE and International Harmonic Standards Impact on Power Electronic Equipment Design (410.99 KB)
Effect of Adaptation Gain in Model Reference Adaptive Controlled Second Order System (255 KB) This paper deals with application of model reference adaptive control (MRAC) scheme to second order systems with different values of adaptation gain.
Effect of throughflow and variable gravity field on thermal convection in a porous layer (147.44 KB) The problem deals with the criterion for the onset of Rayleigh-Benard convection with a throughflow and variable gravity field in a porous layer.
EFFECTIVE HARMONIC MITIGATION TECHNIQUES USING WAVELETS BASED ANALYSIS (531.48 KB) This paper describes the analysis of harmonic elimination methods with wavelet transform method.
Effectiveness of briquetting bio mass materials with different ratios in 10 kW down draft gasifier (203.05 KB) This paper discuss about the effectiveness of using Briquetting of rural bio mass material in Down draft gasifier for easy operation and power generation, during winter and rainy season. Sawdust a milling residue is available in huge quantity
Electical Safety Should Never Take a Holiday (61.17 KB)
Electric Field Analysis In Stress Controlled High Voltage Cables (2.95 MB)
Electric Field and Potential Distributions along Surface of Silicone Rubber Polymer Insulators (1393.22 KB) This paper presents the simulation the results of electric field and potential distributions along surface of silicone rubber polymer insulators.
Electric Field Energy Harvesting Powered Wireless Sensors for Smart Grid (1777.93 KB) In this paper, a new energy harvesting technology using stray electric field of an electric power line is presented.
Electric Metering Commercial and Industrial (172.76 KB)
ELECTRIC METERS (469.76 KB) This paper explains briefly about the types of electric meters, electric meter complaints, electric meter standards and few diagrams.
Electric Meters Paper 2010 (761.33 KB)
Electrical and Magnetoresistive studies Nd doped on La-Ba-Mn-O3 Manganites for Lowfield Sensor application (366.44 KB) In this paper, electrical and magnetoresistive properties of the Nd doped La-Ba-Mn-O3 Manganites type samples has been prepared using the solid state reaction.
Electrical and Optical Properties of organic materials as Hole Transport Layer in Organic Light Emitting Devices (132.77 KB) The aim of this research was to study the electrical and optical properties of N, N`-bis(Inaphthyl)-N,N`-diphenyl-1,1`-biphenyl-4,4`-diamine (NPB) organic materials often used as hole transport layer in Organic Light-Emitting Devices (OLED).
Electrical Circuit Diagrams (4.19 MB) This paper explains how to use circuit diagrams and also shows various electrical circuit diagrams.
Electrical Circuit Diagrams Paper 2010 (4.19 MB)
Electrical circuits (318.16 KB) This paper explains about electrical circuits in general.
Electrical Circuits Paper 2010 (318.16 KB)
Electrical Connectors and Wiring Diagrams (860.5 KB) This section contains drawings of Electrical Connectors and information on Pin Configuration, Pin Numbers, Wire Colors and Pin Descriptions.
Electrical Connectors and Wiring Diagrams 2010 (860.5 KB)
Electrical Efficiency Modeling for Data Centres (1154.36 KB)
Electrical Hazard Awareness Study Guide (2.96 MB)
Electrical Impedance Paper 2010 (1908.53 KB)
ELECTRICAL INTERFACE CONTROL DRAWING (43.26 KB) This drawing describes the electrical interfaces associated with the wi.freestar module.
Electrical Interface Control Drawing Paper 2010 (43.26 KB)
Electrical Machines Paper 2010 (88.88 KB)
ELECTRICAL MACHINES-I (88.88 KB) This paper explains about instruments used to read and observe the general electrical quantities like current, voltage, power, energy, frequency, resistance etc and their wave shapes.
Electrical Measuring Paper 2010 (229.01 KB)
Electrical Measuring Paper 2010 (233.29 KB)
Electrical Metering Paper 2010 (2.68 MB)
Electrical Safety & Arc Flash Protection (1066.9 KB) The focus of this paper will mainly concern some overcurrent protection aspects related to electrical safety.
Electrical Safety and Arc Flash Protection Paper 2010 (1066.9 KB)
Electrical Systems (78.84 KB)
Electrically Induced Damage to Standard Linear Integrated Circuits (149.72 KB) This paper will first review the nature of the threat to integrated circuits in an operating environment and then briefly discuss overall device protection.
Electricity Generation and Distribution in Nigeria: Technical Issues and Solutions (132.49 KB) This paper attempts to address the problem of extreme electricity shortage in Nigeria. This deficiency is multidimensional which are attributed to inadequate infrastructure, inadequate funding of this sector, and energy losses from generation to billing.
Electrochemical corrosion study of Pb-free solders (2.55 MB)
Electromagnetic Imaging of Inhomogeneous Dielectric Cylinders Buried in a Slab Medium (454.22 KB) The electromagnetic imaging of inhomogeneous dielectric cylinders buried in a slab medium by transverse electric (TE) wave illumination is investigated.
ELECTRONIC PESTICIDE USING SOLAR ENERGY WITH MOBILE CONTROL ROBOT (373.92 KB) In this paper, working principle of Electronic pesticide, its construction details & its effects are discussed.
Embedded Firmware Diversity for Smart Electric Meters (233.5 KB) This paper explains how diversity techniques can limit large-scale attacks on smart meters.
EMI Study of Three-Phase Inverter-Fed Motor Drives (1427.75 KB) This paper shows how relatively simple models can be used to forecast EMC, taking into account various control strategies.
ENERGY CONSERVATION DEMAND SIDE MANAGEMENT IN INDIAN POWER SECTORSCENARIO (45.53 KB) In this paper, the responsibility and the areas of the power sector in conserving the Energy being produced have been discussed in detail.
ENERGY CONSERVATION THROUGH ENERGY EFFICIENT AT THERMAL POWER PLANT (204.44 KB) This paper describes basic understanding and awareness about energy conservation around the thermal power plant and also explains the energy saving measures at thermal power plant so as to minimize the auxiliary power consumption.
Energy Efficiency in Industrial HVAC Systems (357.81 KB) This paper briefly explains about HVAC, basic HVAC design, air conditioning, ventilation and conducting HVAC audits.
Energy Efficiency in Industrial HVAC Systems Paper 2010 (357.81 KB)
Energy Efficiency Planning and Management Guide (1616.64 KB) This paper stimulates in thinking about the ways energy efficiency-enhancing measures could be implemented in a plant.
ENERGY EFFICIENT ADVANCED METERING INFRASTRUCTURE USING 3G NETWORK (49.81 KB) An Energy Efficient Advanced Metering infrastructure (EEAMI) is proposed for meter data collection and energy management.
ENERGY MANAGEMENT IN TEXTILE INDUSTRY (173.65 KB) The textile industry is one of the major energy consuming industries and retains a record of the lowest efficiency in energy utilization.
ENERGY POTENTIAL FROM MUNICIPAL SOLID WASTE IN TANJUNG LANGSAT LANDFILL, JOHOR, MALAYSIA (545.65 KB) The objective of this study was to evaluate the composition and characteristics of the generated municipal solid waste (MSW) in order to estimate the high heating value (HHV)
Energy Power Conservation in Motor Applications (175.62 KB)
Energy Saving Paper 2010 (260.41 KB)
Energy Saving through Improved Boiler and Pipeline Schemes (260.41 KB) This paper explains about energy saving through improved boiler schemes and pipeline schemes.
Energy Storage System Sizing for Smoothing Power Generation of Direct Wave Energy Converters (732.62 KB) This paper examines the sizing energy storage system (ESS) for energy converter as the SEAREV. The aim of this ESS is to insure a smoothed output power profile.
Energy Theft in the Advanced Metering Infrastructure (407.21 KB) Global energy generation and delivery systems are transitioning to a new computerized â€œsmart gridâ€. One of the principle components of the smart grid is an advanced metering infrastructure
ENGINEERING REPORT WRITING (39.02 KB) This paper describes briefly how to write an effective engineering report.
Engineering Report Writing 2010 (39.02 KB)
Engineering Symbology, Prints and Drawings Vol 1 (4.59 MB)
Engineering Symbology, Prints and Drawings Vol 2 (2.53 MB)
Enhanced Genetic Algorithm Approach for Security Constrained Optimal Power Flow (289.58 KB) This paper presents a genetic algorithm based approach for solving security constrained optimal power flow problem (SCOPF) including FACTS devices.
Enhancement of Solar Photovoltaic Cell by Using Short-Circuit Current Mppt Method (627.05 KB) This work proposes on short circuit current Based maximum Power Point Tracking for Photovoltaic System, to have the advantages of low frequency switching.
ENHANCEMENT OF SWITCHING TIME AND POWER OF CMOS DEVICES (279.54 KB) We make an attempt to Present ways to further improve the switching characteristics and The transition region of the cmos inverter without any Significant trade-off losses.
ENHANCING THE COMPUTATIONAL PERFORMANCE OF NEWTONRAPHSON POWER FLOW CODES IN POWER SYSTEM PROBLEMS (108.19 KB) In this paper Automatic Differentiation technique is explained in context to power flow, and then demonstrated on a 4-bus test system and simulation results have been compared and analyzed.
ENHANCING WIND/FUEL CELL HYBRID ENERGY SYSTEM (593.43 KB) This paper describe of a renewable energy based hybrid energy system with MATLAB implementation results.
Ensuring Electricity Metering Accuracy and Consumer Confidence in a Changing Market (673.04 KB) This paper explains about the programâ€™s purpose to enable Measurement Canada to exert control over the services provided by AMVs. The Program relieves Measurement Canada of verification tasks.
EPSRC Research Report: An Appraisal Of The Usefulness Of Combined AC and DC (37.25 KB)
Equivalent source corresponding to radiated field of EMC filter components (407.74 KB) In this paper, a method is proposed to construct the equivalent models of the component radiated field. The method proposed is based on the multipolar expansion, which provides reduced models for the field radiated by generic structures.
Estimation of Load Impedance in Presence of Harmonics (644.39 KB) This paper presents a fast and efficient on-line technique for estimating impedance of unbalanced loads in power systems.
Estimation of the SOC and the SOH of Li-ion Batteries, by combining Impedance Measurements with the Fuzzy Logic Inference (498.73 KB) This paper describes experimental results aiming at analyzing lithium-ion batteries performances with aging, for different state of charge and temperatures.
Evaluation of Two Lagrangian Dual Optimization Algorithms for Large-Scale Unit Commitment Problems (372.13 KB) This paper intends to evaluate two dual optimization methods â€“ one based on subgradient (SG) and the other based on the cutting plane.
Evolutionary Design on-line Sliding Fuzzy Gain Scheduling Sliding Mode Algorithm: Applied to Internal Combustion Engine (139.25 KB) Refer to this research, a position on-line fuzzy sliding gain scheduling sliding mode control (AFSGSMC) design and application to internal combustion engine
Experiences of Continuous DGA Monitoring on a Faulty Transformer (107.9 KB) This paper explains some of the aspects of the facts obtained in the monitoring procedure of a faulty transformer.
Experiments of a Novel Magnetic Levitation Stage for Wide Area Movements (1141.1 KB) In this paper, a novel planar type magnetic levitation system without other assistant devices is proposed and it can move with 6 degree of freedom (X, Y, Z, Î¸X, Î¸Y, Î¸Z) in wafer size as well as in nano scale positioning.
Explicit Delay and Power Estimation Method for CMOS Inverter Driving on-Chip RLC Interconnect Load (583.3 KB) The resistive-inductive-capacitive behavior of long interconnects which are driven by CMOS gates are presented in this paper.
EZ â€“ SOURCE FED INDUCTION MOTOR DRIVE: AN EXPERIMENTAL INVESTIGATION (198.32 KB) In this work, the EZ Source inverter is proposed for control of Induction motor drive.
Fabrication of Metal Nanobridge Arrays using Sacrificial Silicon Nanowire (1438.84 KB) In this paper, metal nanobridges of Ti/Au, around 50-200 nm in thickness and width, 5-20 Î¼m in length were fabricated to prove the advantages of the proposed nanowire or nanobridge fabrication method.
FACTS BASED CONTROLLER FOR INTERCONNECTED HYDROTHERMAL POWER SYSTEM (187.89 KB) This studies revels that the proposed controller gives better transient responses and helps in better stabilizing frequency response as well as improve the tie line power flow of the system.
Fault Detection (Condition Monitoring) of Induction Motor based on Wavelet Transform (221.37 KB) In this paper we apply steady-state techniques as well as a new transient technique that is a combination of the EPVA, the Discrete Wavelet Transform and statistics, to the detection of turn faults in a induction motor.
FAULT DIAGNOSIS OF POWER TRANSFORMER BASED ON DISSOLVED GAS ANALYSIS (115.13 KB) This paper proposes a neuro-fuzzy method to perform self learning and auto rule adjustment for producing best rules.
Feeder Reconfiguration for Loss Reduction in Unbalanced Distribution System Using Genetic Algorithm (664.09 KB) This paper presents an efficient approach to feeder reconfiguration for power loss reduction and voltage profile improvement in unbalanced radial distribution systems (URDS).
FILTERING OF ECG SIGNAL USING BUTTERWORTH FILTER AND ITS FEATURE EXTRACTION (84.82 KB) This paper represents filtering of ECG signal of a healthy person and also an unhealthy person using Butterworth filter and then we extract the features of the resultant noise free ECG signals.
FINANCING ENERGY EFFICIENCY (1707.16 KB) This paper aims at generating new ideas and approaches for developing energy effi-ciency financing schemes, which then could be tried out by local institutions, with support from the World Bank and other international agencies and donors.
Financing Energy Efficiency Paper 2010 (1707.16 KB)
Flexible Parameter Identification Tool for Semiconductor Device Design (119.79 KB) This paper presents an efficient parameter identification approach for the simulation of semiconductor devices.
Flexible Wormhole-Switched Network-on-chip with Two-Level Priority Data Delivery Service (1008.77 KB) A synchronous network-on-chip using wormhole packet switching and supporting guaranteed-completion best-effort with low-priority (LP) and high-priority (HP) wormhole packet delivery service is presented in this paper.
Flow Measurement (394.46 KB) This paper explains briefly about basic flow measurement.
FLOW MEASUREMENT, SAMPLING, AND PROCESS CONTROL (91.84 KB) This paper describes about the types of flow measuring devices used in wastewater treatment plants.
Fluid Flow Measurement Selection and Sizing (146.9 KB) This paper helps in understanding the functions and types of flow measurement instrumentation available.
FPGA Implementation of Elliptic Curve Cryptography Engine for Personal Communication Systems (1006.94 KB) In this research, the ECC encryption engine has been implemented in Field Programmable Gate Arrays (FPGA) for two different key sizes, which are 131 bits and 163 bits.
Fundamentals of Electric Motors and Transformers (210.47 KB) This paper explains about some of the fundamental facts of electric motors and transformers.
Fundamentals of Electric Motors and Transformers Paper 2010 (210.47 KB)
Fuzzy Based Digital Automatic Voltage Regulator of a Synchronous Generator with Unbalanced Loads (623.4 KB) In this study, performances of a simulated digital fuzzy AVR evaluated for a wide range of unbalanced loads operating conditions is examined.
FUZZY BASED STATOR FLUX OPTIMIZER DESIGN FOR DIRECT TORQUE CONTROL (318.1 KB) In this paper, a new fuzzy based stator flux optimizer has been proposed for DTC controlled induction motor drivers, simulation studies have been carried out to compare the proposed system behaviours at vary load conditions.
Fuzzy Controlled Parallel PSO to Solving Large Practical Economic Dispatch (497.55 KB) This paper presents a fuzzy controlled parallel particle swarm optimization approach based decomposed network (FCP-PSO) to solving the large economic power dispatch with non-smooth cost fuel functions.
Fuzzy Internal Model Control of Nonlinear Plants with Time Delay - Parallel Distributed Compensation (951.32 KB) The aim of the present investigation is to develop a fuzzy internal model controller (FIMC) for a nonlinear plant with time delay under uncertainties.
Fuzzy Logic Based Smart Anaesthesia Monitoring System in the Operation Theatre (1056.09 KB) The main goals of this study are to enhance the developed diagnostic alarm system for detecting critical events during anaesthesia and to accurately diagnose a hypovolaemia event in anaesthetized patients.
Fuzzy Logic Control of Static Var Compensator for Power System Damping (464.62 KB) In this paper, a fuzzy logic based supplementary controller for Static Var Compensator (SVC) is developed which is used for damping the rotor angle oscillations and to improve the transient stability of the power system.
Fuzzy Logic Controller for PMSM (310.74 KB) This paper aims to investigate the behavior of dual motor drives fed by single inverter using averaging technique MATLAB/Simulink has been chosen as the simulation tools.
GA Based Decentralized Controller for Load- FC of Interconnected Power Systems with RFB Considering TCPS in the Tie-Line (461.68 KB) This paper proposes a design of Genetic Algorithm (GA) based controllers for the decentralized load-frequency control of two-area interconnected thermal reheat power systems with and without RFB considering TCPS in the Tie-line.
Gamma-ray emission from magnetar surface due to starquake (591.69 KB) We estimate the luminosity of magnetar and found to be in the order of 1045 erg s-1 by adopting and calculating the potential difference between the centre and outer edge of the polar cap, conforming to Î³-ray emission.
Gas Fired Heating Plant Management (459.74 KB) This paper intends to focus on the studies which were undertaken enabling, by simulation,to test the sensitivity in both energy and economic terms of Terminal heating equipment sizing, boiler sizing, boiler-plant arrangement and management.
General Formulation of Electric Circuit Theory (499.66 KB) In this paper, the relationship between circuit theory and electromagnetic principles will be examined.
Generator-Voltage System (20.62 KB) This paper explains about the Generator Leads, Neutral Grounding Equipment, Instrument Transformers, Instrument Transformers, Circuit Breakers and Excitation System Power Potential Transformer.
Generic Stochastic Effect Model of Noise in Controlling Source to Electronically Controlled Device (795.02 KB) In this research, the stochastic model which describes the effect of noise in the controlling source to any electronically controlled devices has been proposed.
Geothermal Power Plant: Nesjavellir, Iceland (3.98 MB)
GLOBAL CHAOS SYNCHRONIZATION OF UNCERTAIN SPROTT J & K SYSTEMS (272.39 KB) In this paper, we apply adaptive control method to derive new results for global chaos synchronization of identical Sprott J systems, identical Sprott K systems and non-identical Sprott J and K systems.
Global Reference Guide for Reading Diagrams 2010 (229.58 KB)
GLOSSARY of Technical Terminology (127.65 KB)
Graphical Programming Tools for Electrical Engineering Higher Education (1381.16 KB) This paper discuses some of the most popular graphical programming packages, identifies two alternative solutions and shows how the virtual instrumentation approach pioneered by LabVIEW may enhance the electrical engineering curricula.
Guide To Harmonics and AC Drives (655.45 KB)
Guidelines (draft): Designing and Operating Heating, Ventilation and Air-Conditioning (HVAC) in Hospitals (206.67 KB) This paper explains about designing and operating HVACs in hospitals.
Handbook for Electrical Safety (1279.88 KB) The focus of this paper will mainly concern some overcurrent protection aspects related to electrical safety.
Handbook for Electrical Safety 2010 (1279.88 KB)
Handbook for Teaching â€œCircuit Theoryâ€ (57.67 KB) This paper explains about Sinusoidal excitation, Average power and maximum power delivery, Laplace transformation techniques, Transfer functions, Frequency response and simple filters and Simulation of circuits using SPICE simulator.
Handoff in Wireless Mobile Networks (339.49 KB) Mobility is the most important feature of a wireless cellular communication system. Usually, continuous service is achieved by supporting handoff (or handover) from one cell to another
Handy feedback: Connecting smart meters with mobile phones (698.17 KB) This paper proposes an interactive system that provides instantaneous feedback concerning the energy usage on household and device level.
Heat Exchangers (5.15 MB)
HEATING, VENTILATING, AIR CONDITIONING, AND DEHUMIDIFYING SYSTEMS (1070.97 KB) This paper explains about the use of design and construction of Naval Facilities heating, ventilating, air conditioning, and dehumidifying systems.
HIGH DEFINITON TECHNOLOGY:A REVIEW (214.6 KB) This is a review paper describing the characteristics and benefits of high definition (HD) technology. Digital techniques offer greater accuracy and stability, with better signal to noise ratios than analogue method.
HIGH FREQUENCY BOOST CONVERTER EMPLOYING SOFT SWITCHING AUXILIARY RESONANT CIRCUIT (364.35 KB) A new soft-switching boost converter is proposed in this paper. The conventional boost converter generates switching losses at turn ON and OFF, and this causes a reduction in the whole systemâ€™s efficiency.
High Frequency Power Transformer Measurement and Modeling (1033.97 KB) This article points out some of the issues involved in designing, measuring, and modeling high-frequency magnetics for switching power supplies.
High Frequency Power Transformer Measurment and Modeling 2010 (1033.97 KB)
HIGH PERFORMANCE CONTROLLERS FOR SPEED AND POSITION INDUCTION MOTOR DRIVE (278.58 KB) This paper present new approach in robust indirect rotor field oriented (IRFOC) induction motor (IM) control.
High Voltage Insulators (95.61 KB)
High-performance Ni/Yb2O3/TaN Programmable Memory Cell for Nonvolatile Memory Applications (278.58 KB) Resistive switching in Ni/Yb2O3/TaN programmable memory cells was investigated. We proposed a rearrangement of oxygen vacancies under electric field plays role in resistive switching.
Hot-spot Thermal Models of HV/LV Prefabricated and Outdoor Oil-Immersed Power Transformers (641.52 KB) The aim of this paper is to present thermal models for transformers loaded at prefabricated MV/LV transformer substations and outdoor situations.
How to Read Your Electric Meter (36.9 KB) This paper briefly explains on how to read your gas, dial and digital meter.
How to Read Your Electric Meter (36.9 KB) This paper briefly explains on how to read your gas, dial and digital meter.
HVAC (Heating, Ventilation & Air-conditioning) (158.8 KB) This paper contains a brief note on HVAC.
HVAC AND REFRIGERATION SYSTEM (1143.3 KB) This paper explains about Vapor compression refrigeration cycle, Refrigerants, Coefficient of performance, Capacity, Factors affecting Refrigeration and Air conditioning system performance and savings opportunities.
HVAC assessment handbook: A practical guide to performance measurements in mechanical heating (1831.88 KB) This paper highlights some measurements and techniques that can be used to evaluate HVAC systems for optimum operation.
Hybrid Motor Structure Convenient to Modify the Magnet and Reluctance Torques on the Rotor (1175.01 KB) This paper presents a hybrid motor prototype convenient to modify the magnet and reluctance torques.
HYDROMAGNETIC DIVERGENT CHANNEL FLOW OF A VISCOELASTIC ELECTRICALLY CONDUCTING FLUID (105.53 KB) A theoretical study for the two-dimensional boundary layer flow through a divergent channel of a visco-elastic electrically conducting fluid in presence of transverse magnetic field has been considered.
IAQ Building Education and Assessment Model (I-BEAM) (56.09 KB) This paper identifies elements of the HVAC system that are important to IAQ, as well as information important to developing protocols for the operating set points and schedules consistent with good IAQ performance.
Identification and Classification of Faults in High Voltage Radial Ug Cables by Wavelet Transform (982.28 KB) This paper deals with the identification and classification of faults in high voltage radial UG cables by wavelet transform.
Identification of Impact of Electromagnetic Fields at Low and High Frequency on Human Body (622.47 KB) The article reviews the current state of large-scale studies about the impact of electromagnetic field on natural environment.
Identification of Moisture Content in Cotton Bale by Microwave Imaging (475.99 KB) This research examines a new microwave imaging technique to view the internal moisture variations of cotton bale.
IEE Guidance Document: EMC And Functional Safety (332.49 KB)
Impact of Interface Charges on the Transient Characteristics of 4H-SiC DMOSFETs (1394.34 KB) In this paper, we study the transient characteristics of 4H-SiC DMOSFETs with different interface charges to improve the turn-on rising time.
IMPACT OF RENEWABLE ENERGY SOURCES IN POWER SUPPLY OF INDIA (106.44 KB) The estimates made here indicate that even with a frugal per capita electricity need of 2000 kWh/annum and a stabilized population of 1500 million by 2025, India would need to generate approximately 3000 TWh/yr.
IMPACT OF SKIN EFFECT FOR THE DESIGN OF A SQUIRREL CAGE INDUCTION MOTOR ON ITS STARTING PERFORMANCES (72.01 KB) In this paper we observe the change in the starting performances like change in starting current, torque and efficiency due to skin effect in the squirrel case induction motor.
IMPACT OF STATIC VAR COMPENSATORS ON POWER SYSTEM: A CASE STUDY (313.62 KB) With increase in load, any transmission, distribution and generating model suffers from disturbances. These disturbances effect the overall stability of the system.
Impact on the fuzzy modeling in operation of electric distribution systems (1020.28 KB) In the paper, starting from a fuzzy correlation model of the loads, a power flow analysis from an electric distribution system with the 20 kV voltage level is presented.
Implementation of Direct AC-DC Boost Converter For Low Voltage Energy Harvesting (481.91 KB) In this paper, a direct AC-DC power electronic converter topology is proposed for efficient and optimum energy harvesting from low-voltage micro generators.
IMPLEMENTATION OF IMPEDANCE SOURCE INVERTER SYSTEM FOR PHOTOVOLTAIC (342.49 KB) This paper presents a high performance, low cost inverter for photovoltaic systems based on Impedance-source concept.
Implementing the Smart Grid Initiatives (106.29 KB) This White Paper is offered by an independent industry expert to help key decision makers in the U.S. Government, U.S. electric utilities
Improved Circuit Model of Photovoltaic Array (271.76 KB) The proposed model is realised using Power System Block Set under MATLAB/SIMULINK, however, it can be constructed using standard simulation software such as PSPICE.
Improvement of Power Quality Considering Voltage Stability in Grid Connected System by FACTS Devices (386.02 KB) Voltage-source converter based various FACTS devices have been used for flexible power flow control, secure loading and damping of power system oscillations.
Improvement of the Reliability of the Industrial Electric Networks (371.62 KB) In this work and on the basis of the semi- markovianâ€™s processes, the influence of the time of interlocking the reserve source upon the reliability of an industrial electric network is studied.
IMPROVING POWER SYSTEM STABILITY USING PI CONTROLLER FOR STATCOM (223.69 KB) In this paper investigates the power-system stability improvement by a static synchronous compensator (STATCOM) based damping controller.
Industrial Instrumentation: Flow (745.52 KB) This paper describes the flow measurements of liquids and gases in detail.
INFLUENCE OF INSTRUMENT TRANSFORMERS ON POWER SYSTEM PROTECTION (1156.33 KB) Instrument transformers are a crucial component of power system protection. They supply the protection system with scaled-down replicas of current and voltage signals present in a power network to the levels which are safe
INFLUENCE OF PV PENETRATION IN SAUDI DISTRIBUTION GRID (127.45 KB) The paper has discussed an algorithm for the optimal size and location of PVDG in Power Grid.
INFLUENCE OF TCSC FACTS DEVICE ON STEADY STATE VOLTAGE STABILITY (238.79 KB) The influence of series Flexible AC Transmission Systems (FACTS) device namely, Thyristor-Controlled Series Capacitors (TCSC) on the steady state voltage stability is the main objective of this paper.
Influence of vibrational mode on electrical properties of DNA molecules for ladder model (532.29 KB) Based on the tight-binding Hamiltonian for the ladder model of DNA and within the framework of a Generalized Green's function technique, the electronic conduction through the metal/DNA/metal structure has been numerically investigated.
INLINE ELASTICITY MEASURE OF TEXTILE USING ANN (188.79 KB) In this paper, we propose a technique to measure the Elasticity Modulus of the textile material using flex LVDT.
Inner-Outer preconditioning stratergy for 3D Inductance extraction coupling with fast Multipole Method (195.09 KB) This paper presents an efficient preconditioning technique in order to couple Partial Element Equivalent Circuit (PEEC) method with Fast Multipole algorithm (FMM).
Instrument Transformer (86.07 KB) This paper explains briefly about Instrument Transformer, Current Transformer and Voltage Transformer.
Instrument Transformer Performance Under Distorted Conditions (289.04 KB) This paper explains about a single virtual instrument that can be used for performance measurements of Instrument Transformers (IT) apart from analyzing the magnetic characteristics of cores.
Instrument Transformer, Current Transformer and Potential Transformer (478.6 KB) This paper very briefly describes about Instrument Transformer, Current Transformer and Potential Transformer.
Intelligent Control for Torque Ripple Minimization in Combined Vector and Direct Controls of IM Drive (798.49 KB) To solve this problem, a control method based on the concept of fuzzy logic approach is used. The control scheme proposed uses stator current error as variable.
Intelligent Digital Redesign for Nonlinear Interconnected Systems using Decentralized Fuzzy Control (437.56 KB) In this paper, a novel intelligent digital redesign (IDR) technique is proposed for the nonlinear interconnected systems which can be represented by a Takagi-Sugeno (T-S) fuzzy model.
INTELLIGENT ENERGY MANAGEMENT FOR RESIDENTIAL BUILDINGS BASED ON ZIGBEE (253.61 KB) This paper gives an overview of sensor technology and wireless networks in the development of an intelligent energy management system for residential buildings (IEMSRB).
INTELLIGENT SCADA FOR LOAD CONTROL (173.99 KB) This paper presents the use of intelligent system with Supervisory control and data acquisition system (SCADA) Software and hardware components platform like PLC considered as the main contents of this project.
Interfaces for Renewable Energy Sources with Electric Power Systems (114.08 KB)
Interior-Point Methods for Nonconvex Nonlinear Programming:Jamming and Comparative Numerical Testing (193.25 KB) This paper shows that classical jamming is why the WÂ¨achter and Biegler example fails to converge and show three possible resolutions of this issue, including the one currently implemented in LOQO.
International Journal of Emerging Electric Power Systems (1835.01 KB)
Inversion Layer Effective Mobility Model for Pocket Implanted Nano Scale n-MOSFET (415.66 KB) This paper presents an effective electron mobility model for the pocket implanted nano scale n-MOSFET.
Investigation of 'off-line' relaxation phenomena in oil filled transformers (1514.95 KB) The objective of this paper is to develop an industrial technique for testing and identifying the sensitive aging conditional parameters in different types of field oil filled transformers.
Investigation of Leakage Current Waveforms Recorded in a Coastal High Voltage Substation (431.56 KB) In this paper, an investigation of LC waveforms recorded in a heavily polluted site, over more than 6 years of monitoring, is presented.
INVESTIGATION ON DOUBLY FED INDUCTION GENERATOR STEADY STATE PARAMETERS (233.17 KB) In this paper steady state characteristic of a variable speed Doubly fed induction generator (DFIG) is investigated.
Lab Electrical Power Engineering I (487.21 KB) This paper explains about the experiment which deals with the construction and the operation modes of an induction machine and illustrates the main differences between a squirrel cage rotor and a slip ring rotor.
Lastest Developments IEE Wiring Regulations, BS7671 and Harmonic Standard ER G5/4 (369.41 KB)
Lectures on Numerical Analysis (632.37 KB) This paper explains about Differential and Difference Equations, The Numerical Solution of Dierential Equations and Numerical linear algebra.
Levitation & Thrust Forces Analysis of Hybrid-Excited Linear Synchronous Motor (1346.5 KB) This paper proposes a hybrid-excited linear synchronous motor (LSM) that has potential applications in a magnetically levitated vehicle.
LFC Design of a Deregulated Power System with TCPSUsing PSO (404.53 KB) A control strategy using controlling the phase angle of TCPS is proposed for provide active control facility of system frequency in this paper.
Lightning Warning Systems for use by Airports (3.26 MB)
Linear circuit theory and differential equations (108.36 KB) This paper reviews the basics of linear discrete-element modeling.
LMI-based Sliding Mode Speed Tracking Control Design for Permanent Magnet Synchronous Motors (1214.51 KB) For precisely regulating the speed of a permanent magnet synchronous motor system with unknown load torque disturbance and disturbance inputs, an LMI-based sliding mode control scheme is proposed in this paper.
Load Compensation by Diesel Generator and Three Level Inverter Based DSTATCOM (1067.72 KB) This paper presents the load compensation by diesel generator. In this compensation reactive power, harmonics and unbalanced load current generates because of linear or nonlinear loads.
Long-term Reliability of On-line Partial Discharge Ceramic Sensor for Thermal Power Generators (802.07 KB) The present study describes the considerations on the long-term reliability of the on-line partial discharge (PD) ceramic sensor for thermal power generators.
Loop Antennas for Near-Field Multipolar-Expansion Identification: First Experimental Validations (895.51 KB) In this paper, electromagnetic compatibility is assessed using novel magnetic induction sensors based on the standard CISPR16-1 coils.
LOW LEAKAGE NANOSCALED SOURCE AND DRAIN OVER INSULATOR FINFET WITH UNDERLAP AND HIGH K DIELECTRIC (107.26 KB) In this paper a Source and drain over Insulator (SDOI) FinFET structure in which S/D regions insulated from body by buried oxide with undoped underlap and Si3N4 as dielectric is studied and compared with SDOI FinFET with SiO2 as dielectric.
Low Power Phase Locked Loop Frequency Synthesizer for 2.4 GHz Band Zigbee (256.31 KB) This study was to design a low power fully integrated integer-N PLL frequency synthesizer targeting the 2.4 GHz band IEEE 802.15.4 Std Zigbee.It represents solutions for minimizing the power consumption.
Low Voltage High Gain Linear Class AB CMOS OTA with DC Level Input Stage (350.02 KB) This paper presents a low-voltage low-power differential linear transconductor with near rail-to-rail input swing.
Low voltage, but high tension (427.89 KB) shift is taking place within low voltage (LV) networks. Electricity demand is grow-ing, the amount of distributed generation is increasing, and more and more distributed generation (DG) techniques are being developed to fulÂ¯l the needs of end users.
LOW-POWER, INDUCTORLESS CURRENT FOLDED MIXER IN 0.18-Î¼M CMOS FOR BROADBAND APPLICATIONS (274.32 KB) The proposed mixer is based on a folded double-balanced Gilbert cell topology that enhances conversion gain and reduces power dissipation
Machine Tools Foundation Static and Free vibration analyses (1611.7 KB) Deformations for foundations under static load are studied in present work, the effect of changing stiffening plates shape and cutting conditions such as type of cutting process and angle of cutting forces on these deformation are investigated.
Machine Vision System for Automatic Weeding Strategy in Oil Palm Plantation (444.19 KB) This paper discusses an automatic weeding strategy in oil palm plantation using machine vision system for the detection and differential spraying of weeds.
Magnetic model refinement via a coupling of finite element subproblems (422.81 KB) This paper describes a Model refinement of magnetic circuits which are performed via a subdomain finite element method that simplifies both meshing and solving processes, and quantifies the gain given by each refinement.
Maintaining Voltage Stability in Power System using FACTS Devices (533.09 KB) Modern power systems are prone to widespread failures. With the increase in power demand, operation and planning of large interconnected power system are becoming more and more complex, so power system will become less secure.
Market-Based Transmission Expansion Planning Under Uncertainty in Bids by Fuzzy Assessment (415.45 KB) In this paper, by a simple example it is shown that existing market-based criteria alone cannot completely and correctly evaluate the transmission network expansion from market view.
Measurement of Power Quality through Transformed Variables (124.95 KB) The objective of this paper to present unique features that characterize power quality events & to extract them from generated voltage and current waveforms using Windowed Discrete Fast Fourier Transform.
Measurement Scheme Improving for State Estimation Using Stochastic Tabu Search (267.48 KB) This paper proposes the stochastic tabu search (STS) for improving the measurement scheme for power system state estimation.
Measuring Acoustic Noise Emitted by Power 2010 (889.53 KB)
MEASURING ACOUSTIC NOISE EMITTED BY POWER TRANSFORMERS (889.53 KB) This paper proposes a new Measurement Standardization Procedure to measure and quantify the acoustic noise produced by power transformers in audio and video equipment under normal and adverse mains conditions.
Medical Image Compression Using Quincunx Wavelets and SPIHT Coding (1402.92 KB) This paper introduces an algorithm for medical image compression based on the quincunx wavelets coupled with SPIHT coding algorithm, of which we applied the lattice structure to improve the wavelet transform shortcomings.
Metal-Oxide Surge Arresters Integrated in High-Voltage AIS Disconnectors (1395.25 KB) This paper presents information on the requirements on the disconnector/arrester, the realization and the investigations and tests performed.
Miniature Acousto-Optic Modulators as a New Kind of Phase Modulators in Laser Spectroscopy (244.15 KB) In this study, a development of a new method for frequency control of the external cavity diode laser with the use of FM sideband heterodyne technique where AOM operating in the Raman-Nath diffraction mode is emploied.
Mobile Communication for Older People: (57.9 KB) The fast diffusion of mobile telephony is opening a vast diversity of new opportunities for older people with different levels of physical restrictions due to ageing.
Model of Information Exchange for Decentralized Congestion Management (387.42 KB) The present study examines an efficient congestion management system compatible with the evolving environment.
MODELING AND ANALYSIS OF SINGLE PHASE GRID CONNECTED PHOTOVOLTAIC SYSTEM (650.49 KB) This paper gives a complete computer simulation program of a single phase grid connected PV system using Matlab/Simulink and SimPower System tool.
Modeling and Control of a DFIG-Based Wind Turbine During a Grid Voltage Drop (287.96 KB) In this paper, a complete mathematical DFIG model is proposed.
Modeling Method of a Low-Pass Filter Based on Microstrip T-Lines with Cut-Off Frequency 10 GHz (786.02 KB) This study presented a jointly application of bond graph technique and wave-scattering formalism for a new realization called scattering bond graph model with an advantage to show up explicitly the different wave propagation.
MODELING OF GREEN ENERGY SOURCES â€“A SOLAR AND WIND HYBRID MODEL (301.5 KB) We will focus on Modeling the design and verification process for Renewable and Green Energy sources.Samples like solar,wind and tidal energy are used for making model.
Modeling the Non-linear Load Contributions to Voltage Distortion at the Output of Three (190.31 KB)
Modeling, Simulation and Group Control of Distributed Static Series Compensators (525.73 KB) In this study a detailed model of the DSSC is used to study and simulate the effect of different control strategies applied to a group of DSSCs distributed along a transmission line.
Modelling of a Shipboard Power System (341.39 KB)
Modelling Of Characteristic Parameters for Asymmetric DHDMG Mosfet (874.69 KB) A detailed comparison of proposed Gaussian model with the previously proposed linear model is presented. The proposed model is also compared with Double gate MOSFET,better performance in terms of DIBL effect reduction is observed.
Modern Rectifiers And Power System Harmonics (91.13 KB)
MODIFIED ACTION VALUE METHOD APPLIED TO â€˜nâ€™-ARMED BANDIT PROBLEMS (102.23 KB) This paper investigates a modified approach to action value methods used to solve n-armed bandit problems where one faces repeatedly with a choice among n different options.
Modified Method of Computing Generator Participation Factors by Electricity Tracing with Consideration of Load Flow Changes (296.18 KB) In this paper a sensitivity analysis is proposed to determine the changes in power flows due to changed load.
MOTOR NEURON DISEASE IN EMG SIGNAL USING TIME AND FREQUENCY DOMAIN FEATURES (879.2 KB) Here the time and frequency domain behaviour of the EMG signals obtained from several normal persons and the ALS patients,characteristic features, such as autocorrelation, zero crossing rate and Fourier transform are proposed.
MPPT Algorithm for Solar Photovotaic Cell by Incremental Conductance Method (209.39 KB) This work proposes on Investigation of Incremental conductance Based maximum Power Point Tracking for Photovoltaic System, to have the advantages of low frequency switching.
MULTI OBJECTIVE ECONOMIC DISPATCH USING PARETO FRONTIER DIFFERENTIAL EVOLUTION (144.58 KB) Multi Objective Economic dispatch (MOED) problem has gained recent attention due to the deregulation of power industry and environmental regulations.
Multi-Line Flexible Alternating Current Transmission System (FACTS) Controller (347.04 KB) This paper is intended to discuss a new approach i.e. a multi-line FACTS controller which is interline power flow controller (IPFC) for TSA of a multi-machine power system network.
Multi-Objective Fuzzy Model in Optimal Siting and Sizing of DG for Loss Reduction (332.2 KB) This paper presents a possibilistic (fuzzy) model in optimal siting and sizing of Distributed Generation (DG) for loss reduction and improve voltage profile in power distribution system.
Multi-objective Optimization with Fuzzy Based Ranking for TCSC Supplementary Controller (354.29 KB) This paper investigates the application of multi-objective optimization technique for the design of a Thyristor Controlled Series Compensator (TCSC)-based controller to enhance the performance of a power system.
MULTILEVEL POWER CONVERTERS: A SURVEY (222.04 KB) In view of this, a comprehensive review of MSPC technology is presented in this paper, which includes configurations, control strategies and highlighting key areas of research .
Multiobjective Space Search Optimization and Information Granulation in the Function Neural Networks (1881.03 KB) This study introduces an information granular-based fuzzy radial basis function neural networks (FRBFNN) based on multiobjective optimization and weighted least square (WLS).
Neural Network Imputation In Complex Survey Design (436.81 KB) Methods for incorporating sampling weights in neural network imputation were investigated to account for complex survey designs.
NEURO-FUZZY CONTROL IN LOAD FORECASTING OF POWER SECTOR (210.02 KB) This paper focuses on short term load forecasting by using a hybrid model of neural networks and fuzzy logic.
Neutral to Earth Voltage Analysis in Harmonic Polluted Distribution Networks (819.98 KB) The proposed algorithm composes fundamental frequency and harmonic frequencies power flows. The algorithm and the associated models are tested on IEEE 13 bus system.
New Concepts for Medium Voltage Gas Insulated Switchgear (GIS (1437.73 KB)
New coupling between PEEC method and an Integro-Differential Approach for modeling solid conductors (119.46 KB) In this paper, a coupling between PEEC and an integro-differential method in order to introduce any shape of magnetic-conductive thin plates in PEEC method is presented. The new coupling can be very fast and accurate.
New Techniques for the Prevention of Power System Collapse (354.63 KB) This paper deals with some newer techniques for the prevention of the voltage system collapse for voltage system collapse, which may have a very large economic impact on the society.
NGNs and Energy Efficiency (2.18 MB) This paper presents an overview of the main characteristics of NGNs and looks at how they can minimize power consumption of network, transmission and end-user equipment, as well as in data centres.
NGNs and Energy Efficiency Paper 2010 (2.18 MB)
Nonlinear Static Analysis Assess Seismic Performance,Vulnerability of Code Conforming RC Buildings (1443.77 KB) The three performance levels considered in the present study are immediate occupancy, life safety&collapse prevention. The vulnerability ofbuildings is estimated in terms of vulnerability index to assess the performance of building.
Numerical Methods (74.43 KB) This paper explains about various numerical methods.
Numerical Methods chapter 10 (435.83 KB) This paper describes finite difference methods and finite element methods for partial differential equations.
Numerical Study of Transition Process in a Separated Boundary Layer on a Flat Plate (1443.77 KB) This study shows that for both cases (blunt and semi-circular leading edges) the primary two-dimensional instability originates from the free shear layer of the separation bubble via the Kelvin-Helmholtz mechanism.
Off-State Leakage Power Reduction by Automatic Monitoring and Control System (382.64 KB) This paper propose a new circuit design which monitor total leakage current during standby mode and generates the optimal reverse body bias voltage, by using ABB technique to compensate die-to-die parameter variations.
Ohmic Food Warming Unit for a Mars Exploration Vehicle (113.82 KB)
On the security economics of electricity metering (225.63 KB) This paper focuses on smart meters and ends up with five recommendations for the regulation of a future smart meter infrastructure.
On using PEMFC for Electrical Power Generation on More Electric Aircraft (408.05 KB) In this paper is analyzed the integration of a fuel cell into the existing electrical generation and distribution systems of an aircraft.
ON-LINE CONDITION ASSESSEMENT OF HIGH VOLTAGE CT IN SOUTH AUSTRALIA (239.5 KB) This paper describes experience in the introduction of on-line monitoring techniques for current transformers and bushings.
Optical Frequency Combs: From Frequency Metrology to Optical Phase Control (891.82 KB) This study describes that for a comb with sufficiently broad bandwidth, it is now straightforward to determine the absolute frequencies of all of the comb lines using revolutionized optical-frequency metrology, synthesis, and optical atomic clocks.
Optimal Design of UPFC Based Damping Controller Using Iteration PSO (440.63 KB) This paper presents a novel approach for tuning unified power flow controller (UPFC) based damping controller in order to enhance the damping of power system low frequency oscillations.
Optimal Location and Design of TCSC controller For Improvement of Stability (384.73 KB) Power system stability improvement by a coordinate Design of Thyristor Controlled Series Compensator (TCSC)controller is addressed in this paper.
Optimal Particle Swarm Based Placement and Sizing of Static Synchronous Series Compensator (539.39 KB) The proposed CAPSO algorithm employs conventional quadratic smooth and augmented quadratic nonsmooth generator cost curves with sine components to improve the accurate of the model by incorporating the valve loading effects.
OPTIMAL PLACEMENT FLEXIBLE ALTERNATING CURRENT TRANSMISSION SYSTEM DEVICES (140.55 KB) This paper investigates the voltage stability analysis of 14 bus systems by optimally locating Flexible AC Transmission System (FACTS) devices.
OPTIMAL PLACEMENT OF DSTATCOM AND LOAD FLOW ANALYSIS OF RADIAL DISTRIBUTION NETWORKS (277.79 KB) This paper presents the modeling of shunt Distribution FACT device in load flow analysis for the steady state voltage compensation and loss minimization.
OPTIMAL PLACEMENT OF PHASOR MEASUREMENT UNITS FOR POWER SYSTEM (140.89 KB) This paper present a method to find minimum number of phasor measurement units (PMUs) for complete observability of power system network for normal operating conditions.
OPTIMAL PLACEMENT OF STATIC VAR COMPENSATORS IN POWER SYSTEM (121.67 KB) This paper presents a new method which applies the application of Genetic Algorithm as meta-heuristic optimization method for power system problems in distribution substations.
Optimal Power Flow Path Selection Using Different Shortest Path Algorithms (78.53 KB) The scope of the proposed work is to identify the optimal power flow path using three shortest path algorithms: Dijkstraâ€™s Algorithm, Bellman- Ford Algorithm(BFA)&Floyd Warshall Algorithm (FWA).
Optimal Rotor Structure Design of Interior Permanent Magnet Synchronous Machine (1545.57 KB) A hybrid optimization scheme using GA in conjunction with Kriging is proposed. The algorithm is validated by using two mathematical problems and by optimizing rotor structure of interior permanent magnet synchronous machine.
OPTIMAL SIZING OF DG UNITS USING EXACT LOSS FORMULA AT OPTIMAL POWER FACTOR (95.39 KB) In this paper IEEE 33-bus system is selected for locating and sizing of optimal distributed generation source.
OPTIMALLY LOCATED SVC FOR TRANSMISSION OF RENEWABLE ENERGY (230.8 KB) Sensitivity analysis is used to determine area on which FACTS device has significant influence.This limited area is included in Optimal Power Flow control, it is very difficult to include entire system into optimization process.
Optimization by Stochastic Programming for the Aggregation of a Commercial Virtual Power Plant (276.11 KB) This study describes a general methodology for the aggregation function of a portfolio of DER into a CVPP, in order to maximize the performance in the day-ahead market.
Optimization of a Magnetic Deformable Nano Switch based on Semi-Analytical Model (193.49 KB) This paper is about the optimization of magnetic nano switch using a semi analytical model is presented that allows realizing the magnetic structural coupling considering contact analysis.
Optimization of a Power Mosfet and its Monolithically Integrated Self-Powering Circuits (73.95 KB) This paper presents a physical structure optimization of an integrated semiconductor device design:a power MOSFET and other vertical transistors are integrated within the same die,which introduces self supplied power transistor.
Optimization of Gate â€“ Source/Drain Underlap on 30 nm Gate Length FinFET Based LNA Using TCAD (1032.34 KB) The effect of gate â€“ drain/source underlap (Lun) on a narrow band LNA performance has been studied, in 30 nm FinFET using device and mixed mode simulations.
Optimization of maintenance, diagnostic technique and design of substation equipment (173.39 KB) This paper describes the analysis of service experience for different substation equipment, like circuit-breaker and instrument transformers, and for gas-insulated substations (GIS).
OPTIMIZATION OF THE PERFORMANCE OF THE WIND POWER GENERATION UNIT (342.6 KB) In this paper we analyzed RBF (radial basis function), FFBP (feed forward back propagation) & CFBP (cascade forward back propagation) neural networks for this purpose. At last the simulation results and discussion are presented.
Optimization Shape of Variable-Capacitance Micromotor Using Seeker Optimization Algorithm (573.42 KB) In the current paper, the optimization shape of a polysilicon variable-capacitance micromotor (VCM) was determined using the seeker optimization algorithm (SOA).
Optimization Techniques in Unit Commitment (50.09 KB) This paper presents a review of some of the advanced methods and techniques used to minimize the problems in the field of unit commitment based on many published articles.
Optimized Security Algorithm for IEC 61850 based Power Utility System (439.24 KB) In this paper, we apply security algorithms (i.e., MD-5, SHA-1, and RSA) and measure their processing time and transmission delay of secured mission critical messages.
Optimizing Large- Scale Combinatorial Problems using Max-Min Ant System Algorithm (797.99 KB) In this paper we introduce the Max-Min Ant System based version of the Ant System.
Optimizing the Number of Bits/Stage in 10-Bit, 50Ms/Sec Pipelined A/D Converter (685.31 KB) This paper discusses the options of number of bits/stage conversion techniques in pipelined ADCs and their effect on Area, Speed, Power Dissipation and Linearity.
Optimum Scheme for Insulation System in HV Generator based on Electromagnetic Analysis (897.99 KB) A very powerful method available to analyze electromagnetic performance is Finite Element Method (FEM) which is used in this paper.
OVERVOLTAGES IN PROTECTIVE AND CONTROL CIRCUITS DUE TO SWITCHING TRANSIENTS IN HIGH VOLTAGE SUBSTATION (1299.71 KB) Switching operations in primary circuits and earthing faults induced very often surge voltages and currents in low-voltage cables in the area of highvoltage HV substation
Parameter Estimation Method of Low-Frequency Oscillating Signals Using Discrete Fourier Transforms (109.08 KB) This paper presents a DFT (Discrete Fourier Transform) based estimation algorithm for the parameters of a low-frequency oscillating signal.
PARAMETER ESTIMATION OF VSI FED PERMANENT MAGNET SYNCHRONOUS MOTOR (109.08 KB) This paper discusses modeling and parameter estimation of PMSM. The design of a control system for a high performance drive requires a mathematical model of the motor.
PARTICLE SWARM OPTIMIZATION BASED APPROACH FOR LOSS REDUCTION IN UNBALANCED RADIAL DISTRIBUTION SYSTEM (177.48 KB) The losses at distribution level contribute a major portion of power system losses. Proper sizes of shunt capacitors in unbalanced radial distribution systems (URDS) can reduce some portion of this loss and can improve the voltage profile
Performance Analysis of MultiSource,SingleOutput, BuckBoost DCAC Converter Feeding Active Power (765.35 KB) In this paper, the performance of the proposed converter is studied, through power simulation program (PSIM), under different modes of operation during feeding active power to a distribution network.
Performance Analysis of Fuzzy Logic Based Unified Power Flow Controller (472.46 KB) According to this, the capability of UPFC is observed by using different control mechanisms based on P, PI, PID and fuzzy logic controllers (FLC) in this study.
Performance Analysis of the Linear Induction Motor for the Deep-Underground High-Speed GTX (1903.83 KB) In this study, we examined the running resistance properties of a high-speed traction system based on a variety of tunnel types and vehicle organization methods.
Performance Analysis of the Robust Least Squares Target Localization Scheme (476.49 KB) A practical recursive linear robust estimation scheme is proposed for target localization in the sensor network which provides range difference of arrival (RDOA) measurements.
PERFORMANCE ASSESSMENT OFDESIGNED CONTROLLERS FOR 3TANK BENCHMARKSYSTEM (343.47 KB) In this paper, several controllers have been proposed using pole-placement with integral control.
PERFORMANCE ENHANCEMENT OF POWER SYSTEM BY STATCOM -INTEGRATED ARCHITECTURE (129.52 KB) The paper aims to discuss the Performance Evaluation of STATCOM integrated with 118 â€“ IEEE Test System and the Integrated Design Architecture for Efficient Management of Power System.
Performance Evaluation of a Neural Network based General Purpose Space Vector Modulator (473 KB) The network with 8-bit precision is implemented in the IC XCV 400 and the results are presented. The performance of NN based general purpose SVM with higher bit precision is discussed.
PHASE CHANGE MATERIALS FOR THERMAL CONTROL SPACECRAFT TRANSPORTATION (187.49 KB) This paper discusses a passive thermal control system using PCMs to maintain the temperature within the limits inside the enclosures used for transportation of spacecrafts.
Phasor Discrete Particle Swarm Optimization Algorithm to Configure Micro-grids (1226.99 KB) The present study presents the Phasor Discrete Particle Swarm Optimization (PDPSO) algorithm, an effective optimization technique, the multi-dimensional vectors of which consist of magnitudes and phase angles.
Photonic Implementation of 4-QAM/QPSK Electrical Modulation at Millimeter-Wave Frequency (402.88 KB) This paper propose a photonic method for generating millimeter-wave 4-QAM/QPSK modulated signals. The method is based on optical phase modulation by multilevel electrical signals and optical carrier-suppression.
Photonically Assisted Generation of Arbitrary Millimeter-Wave and Microwave Electromagnetic Waveforms (436.95 KB) This study presents a novel optical technique for generation of arbitrarily shaped broad-band electromagnetic waveforms in the gigahertz-to-multiple-tens-of-gigahertz range using Direct Space-to-Time Optical Pulse Shaping.
PIC BASED SOLAR CHARGING CONTROLLER FOR BATTERY (89.91 KB) This paper presents the use of PIC16F72 based solar charger controller for controlling the overcharging and discharging of a solar cell.
PINE NEEDLE CHARCOAL BRIQUETTES: RURAL TECHNOLOGY OPTION IN PINE FOREST (153.45 KB) This paper attempts to explain the briquetting technology of pine needles and the results showed that a significant improvement in calorific value.
Plant mediated synthesis of silver nanoparticles using a bryophyte: Fissidens minutus and its anti-microbial activity (312 KB) Biological methods of synthesis have paved way for the â€œgreener synthesisâ€ of nanoparticles. These have proven to be better methods due to slower kinetics, they offer better manipulation
POWER FACTOR IMPROVEMENT IN DUAL FEEDBACK PWM CONTROLLED AC/DC DRIVES. (251.72 KB) In this paper PWM controller with dual feedback loop with simple single-stage single-switch input-current shaping circuit was designed and tested for AC/DC drives which generates input current harmonics.
POWER LINE CABLE TRANSFER FUNCTION FOR MODELLING OF POWER LINE COMMUNICATION SYSTEM (306.49 KB) This paper presents the design of a power line communication modelthat describes the relation between the input and output voltage and current of the two-port network.
Power Measurement Tutorial for the Green500 List (176.79 KB) This paper describes the basic procedures to be followed in order to measure the power consumption of a supercomputer.
Power Protection: FaultsTypes & Effects (160.8 KB)
Power Quality Disturbances and Protective Relays on Transmission Lines (204.91 KB) An algorithm based on wavelet multi-resolution analysis (MRA) is used for classification of transmission faults for quick restoration of power supply and for improving the transient stability.
POWER QUALITY IMPROVEMENT IN MATRIX CONVERTER USING HYBRID FILTER (270.4 KB) This paper proposes a hybrid filter to minimize the power quality impact of matrix converters. Matrix converters inject significant harmonics and nonstandard frequency components into power systems.
Power Quality in Entertainment Facilities (55.34 KB)
Power Reduction by Automatic Monitoring and Control System in Active Mode (653.04 KB) This paper describes a novel monitoring scheme to minimize total active power in digital circuits depend on the demand frequency.
Power Regulation of Variable Speed Wind Turbines using Pitch Control based on Disturbance Observer (1566.73 KB) In this paper, the difference between the real wind speed and its rated value is regarded as a disturbance, and a component called disturbance observer (DOB) is added to the pre-designed control loop.
Power Sharing Method for a Grid connected Microgrid with Multiple Distributed Generators (627.87 KB) A grid connected microgrid with multiple inverter-based distributed generators is considered. DG in FFC mode regulates the microgrid as a controllable load from the utility point of view as long as its output is within the capacity limit.
POWER SYNCHRONIZATION CONTROL OF VSC-HVDC TRANSMISSION FOR WEAK AC SYSTEM (259.2 KB) In this paper voltage source converter based HVDC transmission system is used for connecting two ac systems.
Power System Damping Using Hierarchical Fuzzy Multi- Input Power System Stabilizer (509.26 KB) This paper proposes the application of a hierarchical fuzzy system (HFS) based on multi-input power system stabilizer (MPSS) and also Static Var Compensator (SVC) in multi-machine environment.
Power System Security Assessment using Binary SVM Based Pattern Recognition (442.79 KB) This paper proposes a Support Vector Machine (SVM) based binary classification for static and transient security evaluation.
Power System Voltage Control using LP and Artificial Neural Network (360.03 KB) In this paper, voltage and reactive power control using Neural Network techniques have been applied to the 33 shines- Tehran Electric Company.
Power System with PSS and FACTS Controller: Tuning Employing Genetic Algorithm (472.84 KB) This paper presents a systematic procedure for modelling and simulation of a power system installed with a power system stabilizer (PSS) and a flexible ac transmission system (FACTS)-based controller.
Power Theft Prevention and Power Quality Improvement using Fuzzy Logic (250.12 KB) This paper deals with Fuzzy logic based power theft prevention and power quality improvement.
POWER TRANSFORMER LIFE-CYCLE COST REDUCTION (47.86 KB) This paper points out how power transformers may be kept in service longer than is the present policy in many utilities.
Power Transformer Windings Partial Discharge Localization by Transfer Function (501.08 KB) In this paper, the transfer function method is presented as a tool for detection the deformation of the transformer windings.
Predictive Dynamic Model of the Negative Lightning Discharge Based on Similarity - Part 2 Validation (561.07 KB) This paper presents a mathematical model, requiring only the cloud-ground geometry, applied voltage and some atmospheric parameters, has been used to predict the main macroscopic parameters of the negative lightning discharge.
Predictive Dynamic Model of the Negative Lightning Discharge Based on Similarity with Long Laboratory Spark (780.41 KB) This paper presents a predictive dynamic model enabling a description of the whole negative lightning discharge based on LCR line electrical network parameters of electromagnetic field, physical laws and gas discharge theories.
Preparation and Characteristics of Li4Ti5O12 Anode Material for Hybrid Supercapacitor (886.07 KB) To achieve higher EDLC energy density with the Li4Ti5O12, the negative electrode of the hybrid supercapacitor was studied in this work.
PREPARATION AND CHARACTERIZATION OF P3HT-PCBM ORGANIC SOLAR CELLS (133.4 KB) Different air annealing procedures and cathode materials were tried and the characteristics were compared with that of a standard thin film polycrystalline silicon solar cell.
Pressures Developed by Arc (959.22 KB) This paper suggests how to determine the magnitude of pressure generated by arcing fault.
Probabilistic Load Flow Considering Wind Generation Uncertainty (411.83 KB) This paper describes a new approach to Probabilistic Load Flow (PLF) by modifying the Two Point Estimation Method (2PEM) to cover some drawbacks of other currently used methods.
PROCESS CAPABILITY IMPROVEMENT BY PUTTING â€˜STATISTICAL PROCESS CONTROL (124.38 KB) In this paper, the process control of a CNC Grinder manufactured at PMT Machines Ltd. Halol, (Gujarat) India is discussed.
PROCESSING ECG SIGNAL WITH KAISER WINDOW- BASED FIR DIGITAL FILTERS (167.9 KB) The work in this paper is the design of FIR digital filters with Kaiser Window to remove the interferences or the artifacts.
Protective Relays and Trip Units (882.49 KB)
Prototype-based Classifier with Feature Selection and Its Design with Particle Swarm Optimization (894.28 KB) In this study, we introduce a prototype-based classifier with feature selection that dwells upon the usage of a biologically inspired optimization technique of Particle Swarm Optimization (PSO).
Pulse Skipping Modulated DC to DC Step Down Converter Under Discontinuous Conduction Mode (392.55 KB) A DC-to-DC buck converter is modelled and simulated in this paper under DCM.
PYRAMIDALIMAGEBLENDINGUSING CUDAFRAMEWORK (267.88 KB) We propose and implement a pyramidal image blending algorithm using modern programmable graphic processing units. This algorithm is an essential part of an image stitching process for a seamless panoramic mosaic.
Qualitative Modelling for Ferromagnetic Hysteresis Cycle (447.18 KB) In this paper a new qualitative hysteresis model for ferromagnetic core is presented, based on the function approximation capabilities of adaptive neuro fuzzy inference system (ANFIS).
RANGES OPTIMIZATION OF ELECTRICAL MACHINE USING COMPONENT SHARING (152.5 KB) This paper is about the machine ranges optimization (from a few kW to more than 300 kW, and for speeds ranges between 750 rpm to more than 5500 rpm). The approach consists in sharing components to design ranges of products.
REACTIVE POWER CONTROL AND TRANSMISSION LOSS REDUCTION WITH REALIZATION OF SVC AND TCSC (180 KB) This paper has considered the setting of flexible AC transmission system (FACTS) devices as additional control parameters for transmission loss reduction in power system.
Reactive Power Pricing Framework Problems & a proposal for a competitive market (67.39 KB) This paper explores the technical and economic issues of determining reactive power pricing structures in an open-access environment.
Reading your electricity meter! (395.38 KB) This paper briefly explains about reading The Digital Meter, The Dial Meter and The Electronic Meter.
Real Time Monitoring of Long Slender Shaft by Distributed-Lumped Modeling Techniques (558.46 KB) The aim of this paper is to determine the stress levels at the end of a long slender shaft such as a drilling assembly used in the oil or gas industry using a mathematical model in real-time.
REAL TIME PERFORMANCE ANALYSIS OF BUCK DC-DC CONVERTER (252.51 KB) This paper investigates a buck topology that achieves improved performance of direct current dc-dc buck converter by increasing duty cycle and by selecting low side switching configuration to reduce the power losses .
REAL TIME PRICING BASED POWER SCHEDULING FOR DOMESTIC LOAD IN SMART GRID (461.1 KB) In this paper different automated meter reading (AMR) technologies and architecture of smart meter are discussed.
Real-time compensation of instrument transformer dynamics using frequency-domain interpolation techniques (465.46 KB) This paper describes a technique to compensate for effects of instrument transformers dynamics in a computer-based power quality measurement system, the PQA.
Real-Time On Line Tuning Of Fuzzy Controller for Two Link Rigid- Flexible Robot Manipulators (1371.93 KB) In this paper, a real time self-tuning MIMO fuzzy bang-bang controller (FBBC) is proposed to control two link rigid and flexible robot manipulators.
Realization of Electronically Tunable Current mode First-order Allpass Filter and Its Application (448.2 KB) This article presents a resistorless current-mode firstorder allpass filter based on second generation current controlled current conveyors (CCCIIs).
Recent Trends in Ultra Large Capacity Three Phase Transformer Technology (124.01 KB)
RECTENNAS DESIGN, DEVELOPMENT AND APPLICATIONS (1197.64 KB) The present paper describes the development of rectenna in terms of its applications in Microwave Power Transmission, Harmonic Rejection, CP radiation and ISM band.
Reduction of Components in Cascaded Transformer Multilevel Inverter Using Two DC Sources (648.26 KB) In this paper a novel cascaded transformer multilevel inverter is proposed. Each basic unit of the inverter includes two DC sources, single phase transformers and semiconductor switches.
REDUCTION OF LINEAR SYSTEMS USING PARTICLE SWARM OPTIMIZATION AND POLYNOMIAL METHOD (281.85 KB) In this paper,a novel mixed method is used for reducing the higher order system to lower order system. The denominator polynomials are obtained by the PSO Algorithm and the numerator coefficients are derived by the polynomial method.
Refinement of Non-Linear Magnetic Models via a Finite Element Subproblem Method (386.03 KB) This paper presents a Model refinements of non-linear magnetic circuits which performs via a finite element sub problem method which simplifies meshing and solving processes.
Relays: a Path of Great Resistance (143.84 KB)
Reliability Assessment on Different Designs of a SMES System Based on the Reliability Index Approach (601.13 KB) The current paper presents an effective methodology for assessing the reliability of electromagnetic designs when considering uncertainties of design variables.
Reliability Enhancement of Power System using Risk Index Estimation Technique (79.02 KB) The paper presents a simplified approach to evaluate the risk index whose minimization results in the enhancement of power system reliability.
RELIABILITY IMPROVEMENT OF RADIAL DISTRIBUTION SYSTEM WITH DISTRIBUTED GENERATION (93.2 KB) This paper describes a methodology for reliability enhancement of radial distribution system with Distributed Generation (DG).
Reliability state space model of Power Transformer (83.25 KB) In this paper the reliability model of the power transformer is obtained.
Reliability-based Selection of Wind Turbines for Large-Scale Wind Farms (897.35 KB) This paper presents a reliability-based approach to select appropriate wind turbine types for a wind farm considering site-specific wind speed patterns.
RESEARCH SURVEY ON MIFARE WITH RFID TECHNOLOGY (72.27 KB) A paper that discusses the evolving technology of MIFARE and its potential for replacing the existing RFID technology. Though RFID technology has several advantages there are several technical disadvantages of RFID.
Risk Level Evaluation for Power System Facilities in Smart Grid (306.9 KB) This paper proposes a new method to evaluate the priority of maintenance and inspection of the power system facilities in the Smart Grid using the Risk Priority Number.
Robust Control Analysis using Real-Time Implementation of a Hybrid Fuel Cell Power Generation System (764.06 KB) This paper describes a complete robustness analysis is performed for a hybrid Fuel Cell/Supercapacitor generationsystem with power management, realized through the control of two identical boost power converters.
Robust FACTS Controller Design Employing Modern Heuristic Optimization Techniques (402.54 KB) The eigenvalue analysis and non-linear simulation results are presented and compared to show the effectiveness of both the techniques in designing a FACTS-based controller, to enhance power system stability.
Robust Sensorless Speed Control of Induction Motor with DTFC and Fuzzy Speed Regulator (553.83 KB) Soft computing techniques, power electronic switches and low-cost computational hardware have made it possible to design and implement sophisticated control strategies for sensorless speed control of AC motor drives.
Rotor Faults Detection in Induction Motor by Wavelet Analysis (395.24 KB) This paper describes the effects of rotor broken bar fault in the stator current of induction motor operating under non-constant load conditions.A broken rotor bar fault is replicated in a laboratory and its effect has been studied.
Safety Operations on_ Medium Voltage Switchgear (85.49 KB)
SAFETY RULES & SAFETY INSTRUCTIONS (497.5 KB) As per CI. No. 11.3.2 of Gujarat Electricity Grid Code, STU/ Transmission licensee shall prepare his own "Safety Manual" for the Transmission lines: Substations.
SCHOTT White Paper on Solar Thermal Power Plant Technology (2.36 MB)
Selecting Current Transformers Part 1 (247.6 KB) This paper explains about the complexity of selecting the correct current transformer for the application.
SELF TUNING CONTROLLERS FOR DAMPING LOW FREQUENCY OSCILLATIONS (199.95 KB) This paper presents a new control methods based on adaptive Neuro-Fuzzy damping controller and adaptive Artificial Neural Networks damping controller techniques.
Self-Algorithm Traffic Light Controllers for Heavily Congested Urban Route (1480.35 KB) The new method should also be easy for further enchantment of traffic light system in ensuring smoothness of traffic flow especially during peak hours.
Self-Tuning PI-Type Fuzzy Direct Torque Control for Three-phase Induction Motor (1578.23 KB) In this article is proposed the Direct Torque Control (DTC) with Space Vector Modulation (SVM) based on Self-Tuning PI-Type Fuzzy (STPIF) controller.
Sensitivity of input blocking capacitor on Output voltage and current of a PV inverter employing IGBTs (587.58 KB) This paper present a MATLAB-SIMULINK model of a single phase 2.5 KVA, 240V RMS controlled PV VSI (Photovoltaic Voltage Source Inverter) inverter using IGBTs (Insulated Gate Bipolar Transistor).
Sensor Optimisation via Hâˆž Applied to a MAGLEV Suspension System (1789.51 KB) In this paper a systematic method via Hâˆž control design is proposed to select a sensor set that satisfies a number of input criteria for a MAGLEV suspension system.
SF6 gas insulated instrument transformers (366.88 KB) This paper gives a general description of SF6 gas insulated instrument transformers for voltages from 100 kV to 800 kV.
SHAF for Mitigation of Current Harmonics Using p-q Method with PI and Fuzzy Controllers (1316.64 KB) The main objective of this paper is to analyze shunt active filters employing fuzzy and PI controllers.
Short questions and answers Electrical Machines II (91.73 KB) This paper contains couple of short questions and their answers in Electrical Machines II.
Shunt active filter algorithms for a three phase system fed to adjustable speed drive (257.21 KB) This paper presents the simulation of Shunt Active Power filter by using two different control schemes, Indirect current control technique and Synchronous detection technique by using ANN.
SIMM Method Based on Acceleration Extraction for Nonlinear Maneuvering Target Tracking (661.75 KB) This paper presents the smart interacting multiple model (SIMM) using the concept of predicted point and maximum noise level. Maximum noise level means the largest value of the mere noises.
Simple Design Criteria of Injection Transformer for the Dynamic Voltage Restorer (126.01 KB) This paper presents the design strategy of injection transformer for the dynamic voltage restorer.
SIMPLIFIED APPROACHES FOR CONTROLLING DC-DC POWER CONVERTERS (427.44 KB) This paper represents the design procedures of different compensation schemes for voltage mode controlled(VMC) dcâ€“dc switching converters.
SIMPLIFIED SVPWM ALGORITHM BASED DIODE CLAMPED 3-LEVEL INVERTER FED DTC-IM DRIVE (131.41 KB) This paper presents a simplified space vector pulse width modulation (SVPWM) based diode clamped threelevel inverter fed direct torque controlled (DTC) induction motor drive.
Simulation and Analysis of SVPWM Based 2-Level and 3-Level Inverters for Direct Torque of Induction Motor (459.41 KB) This paper presents a new scheme of direct torque control of induction motor for electric vehicles is proposed and the results of an investigation into suitable torque control schemes are also presented.
Simulation and realization of a controlled solar water heating system (1863.08 KB) This paper describes a design and a realization of an example of solar energy exploitation systems; it is a simulation and a realization of solar water heating system with a control board based on the microcontroller PIC 16F877.
SIMULATION OF CYCLOCONVERTER FED SPLIT PHASE INDUCTION MOTOR (300.01 KB) The paper presents an analysis of the performance and speed control of the split phase induction motor when it is fed with cycloconverter.
SIMULATION OF SEPIC CONVERTER FED LEDs (189.27 KB) A current-shaper SEPIC converter for high brightness LEDs is presented in this paper.
SIMULATION STUDIES ON AUTOMATIC GENERATION CONTROL IN DEREGULATED ENVIRONMENT WITHOUT CONSIDERING GRC (243.56 KB) In this paper, analysis of automatic generation control (AGC) using integral controller is carried out in the deregulated environment.
Single Stage PFC Microcontroller Based Drive For Permanent Magnet Brushless DC Motor (285.94 KB) In this paper ,a new approach is presented aim at improving the power factor of three phase bridge inverter that equip with permanent Magnet Brushless DC motor(PMBLDCM)drive through microcontroller.
Sizing Optimization with Thermal and Electrical Matching of a Thermogenerator placed on the Human Body (769.33 KB) In this paper,the study of a whole thermoelectric conversion chain incorporating the thermoelectric module(s), the DC-DC converter and a possible heat sink, in the project of thermal energy harvesting from the human body is presented.
SLAC Electrical Safety (561.63 KB)
SLIDING MODE CONTROLLER DESIGN FOR THE ANTI-SYNCHRONIZATION (161.14 KB) This paper investigates the anti-synchronization of identical hyperchaotic Newton-Leipnik systems (Ghosh and Bhattacharya, 2010) via sliding mode control.
SLOW KICKER MAGNET SYSTEM WITH ENERGY RECOVER PULSE POWER SUPPLY (261.58 KB) Danfysik has developed a novel Slow Kicker Magnet Power Supply ERMPPS (Energy Recover Magnet Pulsed Power Supply) with associating magnet achieving high stability, long flat top and low energy consumption
Smart electricity metering as an energy effi ciency instrument (345.41 KB) This paper presents a brief overview and analysis of regulatory and market conditions for Smart Metering in a selection of European countries and provides examples of innovative energy-saving products, enabled by Smart Metering.
Smart Electricity Metering as an Energy Efficiency Instrument (345.41 KB)
Smart Electricity Metering System for Greenhouses (1721.11 KB)
SMART ENERGY MANAGEMENT SYSTEM FOR DOMESTIC APPLICATIONS IN PAKISTAN (617.31 KB) This paper proposes a smart energy management system that provides the household with a cost effective mix of energy from the available power sources i.e. solar, wind, gas powered generator and the utility (grid).
Smart Metering (264.21 KB) This paper will guide through some of the questions on smart meters and provide an insight into the status and future of smart metering and will focus on electricity meters in Europe.
Smart Metering (264.21 KB) Smart metering is a topic that recently has attracted much attention. Smart metering promises many beneÂ¯ts and projects in Europe, the USA and other countries show that smart metering is technically feasible.
Smart Metering - Not One Size Fits All (203.64 KB)
Smart Metering Electrical Paper 2009 (210.5 KB)
Smart Metering Electrical Paper 2010 (345.41 KB)
Smart Metering for Water Utilities - Oracle Whitepaper (162.98 KB)
Smart Metering Frontier Economics (565.14 KB)
Smart Metering Paper 2010 (264.21 KB)
Smart Metering The Cloud (415.13 KB)
Smart Metering the Clouds (415.13 KB) As cloud computing becomes increasingly pervasive, the data center energy consumption attributable to cloud computing is climbing, despite the clarion call of action to reduce consumption and reverse environmental effects
SOCIAL WELFARE MAXIMIZATION IN DEREGULATED POWER SYSTEM (392.64 KB) In this paper market dispatch problem in the pool-based electricity market is formulated so as to maximize the social welfare of market participants subject to operational constraints given by real and reactive power balance equations.
SOLAR POWERED THREE PHASE MOTOR FOR VARIOUS APPLICATIONS (478.32 KB) The main aim of the paper is to analyze and design of a current fed push pull DC-DC boost converter to integrate three phase electric motor through inverter.
SOLDERING CONNECTIONS FORMATION AT INFLUENCE OF ENERGY OF ELECTROMAGNETIC FIELDS IN WIDE FREQUENCY BAND (109.15 KB) In this paper, the modeling and investigation of electromagnetic heating in soldering processes has allowed optimizing heating speed in local zones of formation of soldering connections.
Solving Generator Loading Problems On Offshore Oil Platforms (97.94 KB)
Solving the Economic Dispatch Problem using Novel Particle Swarm Optimization (396.85 KB) This paper proposes an improved approach based on conventional particle swarm optimization (PSO) for solving an economic dispatch(ED) problem with considering the generator constraints.
Source Couple Logic (SCL): Theory and Physical Design (378.87 KB) This study is to analyse the Source-Coupled Logic (SCL) inverter and the effect of submicron layout parasitics. The SCL inverter circuit model and its operation is defined.
SPEED CONTROL OF BRUSHLESS DC MOTOR ON RESONANT POLE INVERTER USING FUZZY LOGIC CONTROLLER (318.48 KB) Brushless dc motor has been widely used in drive system and servo control because of its fast response ,high density ,high efficiency ,low inertia ,high reliability ,maintenance free.
SPEED CONTROL OF INDUCTION MOTOR WHEN SUBJECTED TO NON-LINEAR VARIATIONS IN PARAMETERS (211.58 KB) In this work the control strategy is derived in the sense of Lyapunov stability theorem such that the stable tracking performance can be ensured under the occurrence of system uncertainties.
Speed Control of Linear Induction Motor using Sliding Mode Controller Considering the End Effects (232.11 KB) In the present paper, the mover speed control of a linear induction motor (LIM) using a sliding mode control design is proposed, considering the end effects.
SPEED CONTROL OF SEPARATELY EXCITED DC MOTOR USING FUZZY NEURAL MODEL (232.11 KB) This paper presents the speed control of a separately excited dc motor using Fuzzy Neural Model Referance controller.
Stability of LTI Systems with Unstructured Uncertainty Using Quadratic Disc Criterion (975.37 KB) This paper deals with robust stability of linear time-invariant (LTI) systems with unstructured uncertainties.
STABILITY STUDY FOR OPTIMAL ENERGY MANAGEMENT IN MULTISOURCES BUILDING (82.16 KB) In this paper a stability study applying numeric analyses on the optimization problem of energy management is studied.
Staged Tests Increase Awareness of Arc-Flash Hazards in Electrical Equipment (411.92 KB) This paper presents experimental results of staged tests simulating the participation of workers in the test scene.
Standard Technical Specification for PREPARATION OF ELECTRICAL ENGINEERING DRAWINGS (77.25 KB) This paper details the requirements for the production or modification of electrical engineering drawings for the Hunter Water Corporation (HWC).
STATCOM control strategy Lyapunov energy function, fuzzy logic control improving transient stability (896.51 KB) This paper proposes a nonlinear control strategy of a Static Synchronous Compensator (STATCOM) for improving transient stability of multimachine power system.
Static Voltage Stability Assessment Considering the Power System Contingencies (702.47 KB) This paper, by considering of power system contingencies based on the effects of them on Mega Watt Margin (MWM) and maximum loading point is focused in order to analyse the static voltage stability using continuation power flow method.
Statistical Testing of Electric Meters (620.97 KB) This paper explains about the features of a statistical sampling/testing plan, regulation requirements, inspection levels and applications for Electric Meter testing.
Steady-State Analysis and Control of Double Feed Induction Motor (429.31 KB) This paper explores steady-state characteristics of grid-connected doubly fed induction motor (DFIM) in case of unity power factor operation.
Stimulus Artifact Suppression Using the Stimulation Synchronous Adaptive Impulse Correlated Filter (1060.46 KB) We propose an event-synchronous adaptive digital filter for the suppression of stimulation artifact and M-wave in this application.
Structure-vibration Analysis of a Power Transformer (154kV/60MVA/Single Phase) (1734.43 KB) In this paper, the types of mechanical exciting forces applied to the power transformer were classified, the mechanical damage mechanism of power transformer was identified using vibration transfer route to machine or structure.
Studies on determination of optimum distance between Tmotes for optimum data transfer in a network (1441.18 KB) This paper deals with the determination of optimum distances to reduce the cost and increase the reliability of the entire sensor network with Wireless Local Loop (WLL) capability.
Study of DC-AC Measuring Instruments (431.05 KB)
Study of Optimal Design of Low Pass Block Digital Filter (166.41 KB) In this paper design of low pass optimal block digital filter is compared with traditional low pass overlap-save block digital filter.
Study of the Behavior of AC Discharges of Water Drops on both Conducting and Dielectric Solid Surfaces (908.89 KB) This paper presents the results of a study carried out on the deformation of a water surface and the effect water drops have on both conducting and dielectric solid surfaces.
Study of Tower Grounding Resistance Effected Back Flashover to 500 kV Transmission Line (857.58 KB) This paper studies the 500 kV transmission lines from Mae Moh, Lampang to Nong Chok, Bangkok, Thailand, which is double circuit in the same steel tower with two overhead ground wires.
STUDY ON EFFECT OF UPFC DEVICE IN ELECTRICAL TRANSMISSION SYSTEM (1021.72 KB) In this paper a MATLAB Simulink Model is considered with UPFC device to evaluate the performance of Electrical Transmission System of 22 kV and 33kV lines.
Subproblem Approach for Thin Shell Dual Finite Element Formulations (1760.92 KB) In this paper, the sub-problem technique is applied on dual formulations to the solution of thin shell finite element models. Both the magnetic vector potential and magnetic field formulations are considered.
Supercritical Boiler Technology Matures (805.68 KB) This paper discusses about the advanced technology and reliability of the latest supercritical boilers.
SUPPRESSION OF POWERLINE INTERFERENCE IN ECG USING ADAPTIVE DIGITAL FILTER (171.73 KB) In this paper, FIR adaptive filter based on a least mean square (LMS) algorithm for eliminating 50Hz powerline interference in ECG signal is proposed.
Swarm Intelligence based Optimal Linear Phase FIR High Pass Filter Design using Particle Swarm Optimization (354.78 KB) In this paper, an optimal design of linear phase digital high pass finite impulse response (FIR) filter using Particle Swarm Optimization with Constriction Factor and Inertia Weight Approach (PSO-CFIWA) has been presented.
Switching (43.9 KB)
Switching Principles Paper 2010 (43.9 KB)
Symmetrical Component as a Technique for analysis of fault and Improvement of Over current Protection Scheme (306.84 KB) In this paper we study how the concept of symmetrical components helps for improvement of different protection schemes.
Synthesis and Charaterization of Magnesium Zinc Ferrites as Electromagnetic Source (179.72 KB) The study of Synthesis and Charaterization of Magnesium Zinc Ferrites as Electromagnetic Source using a conventional technique.
System Simulation for EMC Network Analysis (440.31 KB) The concept of using compact models of power electronics converters to represent their EMC behavior. The model does not need any knowledge of the converter design since it is identified from external measurements.
Taming The Rogue Wave: Techniques For Reducing Harmonic Distortion (3.08 MB)
TECHNICAL MANUAL: MECHANICAL DESIGN HEATING, VENTILATING, AND AIR-CONDITIONING (144.1 KB) This paper provides guidelines for design of mechanical systems for heating, ventilating, and air conditioning (HVAC).
Temperature Dependence of Electrical Overstress (319.77 KB)
Terahertz quantum-cascade lasers (604.19 KB) This paper reviews the state-of-the-art and future prospects for Terahertz quantum-cascade lasers, including efforts to increase their operating temperatures, deliver higher output powers and emit longer wavelengths.
TESTING OF ELECTRICAL MACHINES USING A DATA ACQUISITION AND PROCESSING SYSTEM (194.05 KB) This paper deals with electrical machines testing, including high power ones, using an Data Acquisition and Processing System (DAPS), based on a PC compatible microsystem.
Testing of Transformers (285.8 KB) This paper discusses about few common tests that can be done on the transformer.
Testing of Transformers Paper 2010 (285.8 KB)
TESTING UPDATE ON PROTECTIVE CLOTHING & EQUIPMENT FOR ELECTRIC ARC EXPOSURE (541.38 KB) This paper includes an update on testing to characterize electric arcs and the performance of flame resistant clothing, first reported on at the 1996 Petroleum Chemical Industry Conference.
The 21st Century Electric Car (76.4 KB)
The Dynamic Simulation of the Three-Phase Brushless Permanent Magnet AC Motor Drives Using Lab View (272.73 KB) In this paper, a mathematical model of the three-phase brushless permanent magnet AC motor drives in abc reference frame is described.
The effect of conventional instrument transformer transients on numerical relay elements (270.68 KB) This paper describes the effect of conventional instrument transformer transients on numerical relay elements and discusses about numerical relay designs that cope with conventional instrument transformer transients.
The Effect of Cyclone Shape and Dust Collector on Gas-Solid Flow and Performance (409.72 KB) In the present work, the particle re-entraining phenomenon from the dust collector to the cyclone body was observed after considerable time.
The Effect of Electrical Properties by Texturing Surface on GaAs Solar Cell Efficiency (143.72 KB) This paper discusses on the method to resolve the optical losses problem that have been hindering the totality efficiency of the photovoltaic using Solar cell simulation.
The History of Electric Measuring Instruments and Active Components (233.29 KB) Precision electric meters are indispensable to the development of technology in this age. The first electric measuring instruments, however, were physically impossible to transport, and were functionally inadequate for use in a laboratory.
The Impact of International and European Standards upon Power Quality (73.65 KB)
The Influence of the Commons Structure Modification on the Active Power Losses Allocation (975.11 KB) In this paper is presented the influence of the modification of commons structure has on the specific price of transfer and on active power losses.
The other Electrical Hazard: Electric Arc Blast Burns (805.07 KB) This paper outlines about the information for evaluation of the degree of hazard involved with various voltages and capacity ratings of equipment and the required precautions and protective means to avoid injury..
The Other Electrical HazardPaper 2010 (805.07 KB)
The Pulse of Tidy Street (129.09 KB)
THE REDUCTION OF PAPR IN OFDM BY USING NEW COMPANDING TRANSFORM (275.31 KB) This paper proposes a new companding algorithm. The proposed algorithm offers an improved bit error rate and minimized out-of-band interference while reducing PAPR effectively, compared with the others.
The Seven types of Power Problems (199.09 KB)
The Striking Facts About Lightning and Surge Protection (8.26 KB)
The Theories and Modeling of the Kilowatt-Hour Meter (633.59 KB) This paper presents the basic understanding of how a modern induction-type kilowatt-hour meter works as well as the physical theories that support this understanding.
THE USE OF SMART BRANCH-CIRCUIT METERING TECHNOLOGY TO LOWER BUILDING ENERGY USE (202.84 KB)
Third Harmonic Injection Circuit to Eliminate Electrolytic Capacitors in Light-Emitting Diode Drivers (1458.03 KB) A new third harmonic injection circuit for light-emitting diode (LED) drivers is proposed to eliminate electrolytic capacitors and thereby extend the lifetime of LED drivers.
THREE PHASE FIVE LEVEL AND SEVEN LEVEL INVERTER FED INDUCTION MOTOR DRIVE WITH TWO CASCADED H-BRIDGE CONFIGURATION (317.85 KB) This paper deals with study of Three phase Five Level and Seven Level inverter fed induction motor drive .
Three Phase High Power Quality Two-Stage Boost Rectifier (453.67 KB) Three-phase two-stage boost rectifier with sinusoidal input current are presented and a novel topology with two active power devices is proposed.
Three-Level Converters based Generalized Unified Power Quality Conditioner (508.46 KB) A generalized unified power quality conditioner (GUPQC) by using three single-phase three-level voltage sourceconverters (VSCs) connected back-to-back through a common dc link is proposed.
Three-Phase High Frequency AC Conversion Circuit with Dual Mode PWM/PDM Control Strategy (765.03 KB) This paper presents a novel three-phase utility frequency to high frequency soft switching power conversion circuit with dual mode pulse width modulation and pulse density modulation for high power induction heating applications.
TMS320F2812 BASED IMPLEMENTATION OF SENSORLESS CONTROL FOR BLDC MOTOR (573.12 KB) The paper attempts to develop a novel sensorless control scheme suitable for brushless dc permanent magnet (BLDC-PM) motor with a view to elaborate its flexible operating status.
TO ESTIMATE THE FAULT IN TRANSMISSION LINE USING HAAR FUNCTION (519.84 KB) In this paper, the sine and cosine Fourier co-efficient are expressed in terms of Haar co-efficient.
TOPOLOGY CODING IN SPECTRAL DOMAIN FOR EFFECTIVE MEDICAL IMAGE RETRIEVAL (348.84 KB) This paper present an approach for image retrieval based on shape based approach. The approach is developed with a curvature representation approach
Torque Ripple Minimization in Switched Reluctance Motor Using Passivity-Based Robust Adaptive Control (537.25 KB) In this paper by using the port-controlled Hamiltonian (PCH) systems theory, a full-order nonlinear controlled model is first developed.
Tracking Objects in Color Image Sequences: Application to Football Images (471.68 KB) In this paper, we present a comparative study between two computer vision systems for objects recognition and tracking, these algorithms describe two different approach based on regions constituted by a set of pixels.
TRAJECTORY TRACKING CONTROL OF SCORBOT-ER V PLUS ROBOT MANIPULATOR BASED ON KINEMATICAL APPROACH (293.39 KB) In this paper, two approaches to generating such trajectories: straight lines in joint space and straight lines in Cartesian space have been discussed.
Transformer Errors and Transformer Inrush:Measured by Magnetic, Optical and Other Unconventional CTs (992.62 KB) This paper will identify some of the conditions in which classical magnetic current transformers are prone to error and review the various types of current sensors available on the market.
Transformer Polarity (94.26 KB) This paper briefly describes about transformer polarity.
Transformer Polarity Paper 2010 (94.26 KB)
Transformer Tapchanging Under Load: A Review of Concepts and Standards (88.68 KB) An electric power system, operating as intended, is a prime illustration of slow dynamics wherein long term trends may result in less than optimal system operation.
TRANSFORMER TYPES (191.31 KB) This paper describes the types of transformers.
Transformers (961.39 KB) This paper explains about transformers in detail.
Transients and Electric Metering (1550.05 KB)
Transmission Expansion Planning Considering Network Adequacy and Investment Cost Limitation (404.92 KB) In this research, STNEP is being studied considering network adequacy and limitation of investment cost by decimal codification genetic algorithm (DCGA).
Transmission Planning â€“ a Probabilistic Load Flow Perspective (403.42 KB) The objective is to achieve a network that works without limit violations for all (or most of) scenario realizations. The case study is represented by the IEEE 14 buses test power system.
Tuning a Fractional Order PID Controller with Lead Compensator in Frequency Domain (438.96 KB) To achieve the desired specifications of gain and phase margins for plants with time-delay that stabilized with FO-PID controller a lead compensator is designed.
Tuning of Power System Stabilizers in a Multi-Machine Power System using C-Catfish PSO (421.29 KB) The main objective of this paper is to investigate the enhancement of power system stability via coordinated tuning of Power System Stabilizers (PSSs) in a multi-machine power system.
Ultrasonic Flow Measurement: Technology and Applications in Process and Multiple Vent Stream Situations (1696.29 KB) This paper explains about the characteristics of ultrasonic flow measurement and their benefits in specific cases.
Uncertainty in measurements of power and energy on power networks (164.03 KB) In this paper, the general problem is to determine the uncertainty of the energy produced in a specified power station and delivered to different consumers.
Uncertainty in Measurements of Power and Energy Paper 2010 (164.03 KB)
Understanding Charge Dynamics in Elastomers Adopting Pulsed Electro Acoustic (PEA) Technique (954.12 KB) In the present work, Pulsed Electro Acoustic (PEA) technique was adopted to understand the space charge dynamics in elastomeric material.
Understanding Nonlinear Loads And Generator Set Interation (41.55 KB)
Using Support Vector Machine for Prediction Dynamic Voltage Collapse in an Actual Power System (414.56 KB) This paper presents dynamic voltage collapse prediction on an actual power system using support vector machines.
Using the Electrical Wiring Diagram (1852.28 KB) This paper explains the features of each EWD section and also how to apply the system circuit diagrams and support sections in diagnostic process.
Using the Electrical Wiring Diagram Paper 2010 (1852.28 KB)
Variable Generation on the Dispatch Operation in Isolated Power Systems (906.56 KB) In this paper, the operation of medium/small isolated power systems with a high share of variable generation is addressed and discussed.
VIBRATION SENSOR FOR HEALTH MONITORING OF ELECTRICAL MACHINES IN POWER STATION (101.79 KB) The present paper describes a novel fiber optic vibration sensor for health monitoring of electrical machines, which utilizes relatively simple technologies and offers moderate costs.
VISION BASED AUTONOMOUS LATERAL AND LONGITUDINAL CONTROL SYSTEM (577.54 KB) This paper proposes 1D sensor calibration algorithm which makes the vehicle to identify the track independent of various lighting conditions.
VOLT-SECOND BALANCE FOR MITIGATION OF INRUSH CURRENT IN SINGLE PHASE TRANSFORMERS (143.84 KB) This paper proposes a simple technique to limit the flux linkage during the time of transformer energization and prevents the flux saturation there by reducing the inrush current.
VOLTAGE STABILITY IMPROVEMENT IN POWER SYSTEM BY USING STATCOM (115.33 KB) The proposed work was analyzed using IEEE 14 bus test system. The STATCOM improves the voltage stability margin of the system.
Voltage Temperature Monitoring System (VTMS) for a BTS Room (718.4 KB) VTMS is a Microcontroller based controlling unit which controlls the operation of generator and battery when PDB in not available in the BTS room.
Volts, Amps and Ohms (113.16 KB)
Wavelet Transform and Support Vector Machine Approach for Fault Location in Power Transmission Line (305.59 KB) This paper presents a wavelet transform and Support Vector Machine (SVM) based algorithm for estimating fault location on transmission lines.
White Paper on Renewable Energy (2.22 MB)
Whole-house Measurements of Stanby Power Consumption Paper 2010 (37.72 KB)
Whole-House Measurements of Standby Power Consumption (37.72 KB) This paper explains about the variation in standby power consumption.
Wireless Control for an Induction Motor (456.67 KB) This paper discusses the development of wireless structure control of an induction motor scalar drives.
Wiring diagram layout (85.2 KB) This paper explains how to read wiring diagrams, symbols used in wiring diagrams and explanation of troubleshooting procedures.
Wiring Diagram Layout Paper 2010 (85.2 KB)
Work in Energy Efficiency (281.88 KB) This paper details some of the current contributions by the School of Architecture and Planning.
Work in Energy Efficiency Paper 2010 (281.88 KB)
Zero-one Integer Programming Approach to Determine the Minimum Break Point Set (810.96 KB) The current study presents a zero-one integer programming approach to determine the minimum break point set for the coordination of directional relays.

Chemical Engineering Civil Engineering Data Communications Electrical Engineering Electronic Engineering Information Technology Instrumentation Mechanical Engineering Project Management

Training Courses and Workshops - IDC Technologies - Your Engineering Training Partner

Electrical Engineering

Free Technical Reference and White Paper Downloads

Technical References